single-stage dialing for 2 softphones + 2 OBi110

[gglaze]

How configure 2nd softphone (OBION on Ipad) for single-stage dialing using same OBi110 gateway as the first softphone (OBiApp + xlite4)? Ipad OBION belongs to circle-of-trust. Desired gateway speed dial number is 3. Target voice service is sp2. OBiTalk implements this easily for one, but not for two, softphones.Thanks.

[RonR]

Single-Stage Dialing Through Any OBi Trunk

[gglaze]

Thanks RonR. Simplified your configuration to solve my problem:

OBION SINGLE-STAGE DIALING
--------------------------------------------------------------
--------------------------------------------------------------
Single-Stage Dialing for OBION on Ipad:
(omitting option to use non-primary ports)
(incoming rings both OBi110 AP and OBION Ipad)


Required dialing sequence to use ACP's OBi110, speed dial 3, as gateway:
normal, using automated attendant: 3#
single-stage dialing, bypassing automated attendant:    3*area code_7 digit number
or,                     3*1_area code_7 digit number
(OBiTALK service requires speed dial 3* to direct call to proper device)

My Trusted Callers:
OBi110 GG: 200 000 001
OBi110 AP: 200 000 002
OBiApp GG: 290 000 003
OBION Ipad:290 000 004

Implementation:

1) define a digit map including trusted callers:
My User Settings -> User Defined Digit Maps -> User Defined Digit MapX:
Label: cot
DigitMap: (200000001|200000002|290000003|290000004)

2) My Voice Services -> OBiTALK Service -> InboundCallRoute:
original value: {(290000003|200000001|290000004)>(xx.):SP2},{(290000003|200000001|290000004):aa},{ph,PP(ob290000004)}
new value: {(Mcot)>(Msp2):SP2},{(Mcot):aa},{ph,PP(ob290000004)}

above rule works because exact match to Mcot invokes aa.
single-stage call value has an Mcot value plus digits of desired phone number.
--------------------------------------------------------------
--------------------------------------------------------------