Xlite won't work despite the 110 working with Google.

[Mycal]

I have the 110 set up with Google Voice.  The physical phone is working fine.], both makes and receives calls as it should   I have both xlite and  3cx installed on my computer  They both register/connect to OBITALK and enable themselves.  But neither will make a phone call.  I always get a busy signal and a message FAILED TO ESTABLISH CALL.   I have checked and double checked the settings, opened ports, tried variations on the settings and nothing works.  Anybody have any ideas?

[RonR]

Can you reach the echo test server by dialing : **9 222 222 222

If so, make sure OBiAPP for PC is configured properly:

OBiTALK Number : (the 290xxxxxx OBiTALK number from the OBiTALK Web Portal)
Voice Gateway : (Your OBi110 OBiTALK number)

Then check your OBi110 configuration:

Voice Services -> OBiTALK Service -> InboundCallRoute : {(290xxxxxx)>(Msp1):sp1},{290xxxxxx:aa},{ph}

where 290xxxxxx is your OBiAPP for PC OBiTALK number.