Text only | Text with Images

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: jclark5093 on June 11, 2011, 06:53:18 PM

Title: Obi100 and PBXes.org
Post by: jclark5093 on June 11, 2011, 06:53:18 PM
Is it possible to link my PBXes account to my Obi device? I already have it set up with my trunks that I use on my smartphone, and it would be nice to have everything consolidated.

I posted something a bit more vague in another forum, but this is what and where I should have posted.

I know nothing of Asterisk, though I'm technically adept I just don't have that knowledge. I do have my PBXes set up properly and use it with CSipSimple on Android. I would like to use it on my Obi100 as well.

Thanks  ;)
Title: Re: Obi100 and PBXes.org
Post by: Riyas on June 13, 2011, 07:33:08 AM
Hi,

I can confirm you that pbxes.org is working with Obi. I have one pbxes account (free one) set in SP1 with 2 inbound and 2 outbound routes. I am using dial plan (in pbxes) to select the correct route. If you need any help to configure it, feel free to ask me. I'll try my best.
Title: Re: Obi100 and PBXes.org
Post by: codex22 on July 28, 2011, 11:32:21 AM
Though I'm not the original poster, I'd like to see the correct settings for registering a OBI-110 to pbxes.org.

I just tried and only get "Register Failed: No Response From Server ".

Thanks

Michael
Title: Re: Obi100 and PBXes.org
Post by: RonR on July 28, 2011, 11:54:51 AM
In most cases, the only settings required (from Defaults) to register the OBi as a SIP client to a SIP server are:


Service Providers -> ITSP Profile x -> SIP -> ProxyServer

Voice Services -> SPx Service -> AuthUserName

Voice Services -> SPx Service -> AuthPassword

Voice Services -> SPx Service -> X_ServProvProfile : (must match ITSP Profile)
Title: Re: Obi100 and PBXes.org
Post by: codex22 on July 28, 2011, 02:56:10 PM
Hi Ron,

I haven't had a problem configuring another SIP service. Just can't get it to work with PBXes.

There has been a thread in January (http://www.obitalk.com/forum/index.php?topic=46.msg77#msg77 (http://www.obitalk.com/forum/index.php?topic=46.msg77#msg77)) in which somebody had the exact same problem.

OBISupport answered with:
"Our next firmware release will have the fix for this."

There have been releases since, but maybe that fix (whatever it is exactly) never made it in?

Michael
Title: Re: Obi100 and PBXes.org
Post by: RonR on July 28, 2011, 05:25:39 PM
codex22,

I signed up for a free PBXes account and created extension 1234.

In the OBi, I set ProxyServer to pbxes.org, AuthUserName to myusername-1234, and AuthPassword to the password I assigned to extension 1234.  After a reboot, the OBi instantly acquired SIP registration with 188.40.65.170.
Title: Re: Obi100 and PBXes.org
Post by: codex22 on July 29, 2011, 12:19:26 AM
Thanks Ron for your efforts!

Haven't done anything different, but it still doesn't work.

It's a remote OBI, I'll get one on site on the weekend, should be easier for testing.

Furthermore, I'm in the process of upgrading my PBXes account to get access to log files.

Will report back about my findings!

Michael
Title: Re: Obi100 and PBXes.org
Post by: codex22 on July 29, 2011, 03:54:51 PM
The local OBI worked with PBXes without a hitch - and soon later the remote one started to register as well.

Guess it was some network glitch that kept the remote one from getting through.

Thanks for the help!

Michael
Title: Re: Obi100 and PBXes.org
Post by: jclark5093 on August 02, 2011, 10:30:08 PM
I just got a second one (my original one got a red death light blinky.... we'll see about tech support/warranty...)

Anyway, assuming my old one is replaced I will definitely try this as a remote device (for using a softphone on my cell instead of using cell minutes... virgin mobile $25/mo ftw)

Thanks for the advice, guys - I'll test it on my new line tomorrow and report back!
Text only | Text with Images