OBiTALK Community

Firmware, Software Updates => Firmware / Advisories / Notifications for OBi Products => Topic started by: tob.ott on September 19, 2015, 09:12:09 am



Title: FW manual update -- local web UI reports old version
Post by: tob.ott on September 19, 2015, 09:12:09 am
Hi,
I've attempted to update my Obi200 to the latest released firmware (as of Sep 19, 2015) by downloading from: http://fw.obihai.com/OBi2-latest.fw.

I applied the update, apparently successfully, but see the following version reported in the local web UI:
SoftwareVersion   3.0.1.4738
HardwareVersion   1.4

Based on the release notes, I would expect that the version reported should be: 4581


If I attempt to reapply the update, the firmware update process reports that I already have the latest version.

Is this the latest release for the hardware version I have?

Thanks


Title: Re: FW manual update -- local web UI reports old version
Post by: Rick on September 19, 2015, 09:19:17 am
Should be 4822 per this: http://www.obitalk.com/forum/index.php?topic=8982.0


Title: Re: FW manual update -- local web UI reports old version
Post by: azrobert on September 19, 2015, 09:21:38 am
Here is the download link for 4822:
http://fw.obihai.com/OBi202-3-0-1-4822.fw

Someone reported they were using 4915, but the download failed for me.


Title: Re: FW manual update -- local web UI reports old version
Post by: tob.ott on September 19, 2015, 10:12:49 am
thanks for your responses. I misread the release notes post. I was expecting the latest info on the top of the post.

Will the Obi202 fw work on the Obi200? I tried modifying the supplied URL to be obi200-3-0-1-4822.fw but there was an access denied.

Thanks again!


Title: Re: FW manual update -- local web UI reports old version
Post by: azrobert on September 19, 2015, 10:58:34 am
The OBi202 FW works on both boxes.


Title: Re: FW manual update -- local web UI reports old version
Post by: tob.ott on September 19, 2015, 12:58:48 pm
Thanks! I've successfully updated to 4822. :D