|
Title: how do you register obi1062 with elastix/freepbx? Post by: lageotakes on February 22, 2016, 02:43:36 pm I am trying to get my obi1062 to work with my elastix pbx. I had it working with my piaf pbx but I am unable to register it with elastix.
I created an extension 777 in elastix and created a password xxxx I made the following changes in my obi1062. itsp profile c sip ProxyServer 192.168.1.2 (ip of exlastix) ProxyServerPort 5060 RegistrarServerPort 5060 OutboundProxyPort 5060 voice service sp 3 AuthUserName 777 AuthPassword xxxx X_KeepAliveServerPort 5060 X_UserAgentPort 5062 (should this be 5062? I also tried 5060) I can reachthe pbxz with yate sip client in computer. As stated before this was working with my piaf pbx. Any ideas? Title: Re: how do you register obi1062 with elastix/freepbx? Post by: lageotakes on February 22, 2016, 03:08:23 pm I also want to mention that the status page of the obi1062 has the following error
SP3 Service Status Register Failed: No Response From Server (server=192.168.1.2:5061; retrying) I don't see where the port number5061 is listed in the obi1062. I only saw ports 5060 and 5062 is listed above. I tried changing the port to 5061 of the elastix extension page, but that did not work either. where do you change the port number in the obi1062. Title: Re: how do you register obi1062 with elastix/freepbx? Post by: lageotakes on February 22, 2016, 03:28:18 pm Never mind figured it out. I had the obitalk settings box checked. I thought this would pick up the value that was in the box which was port number 5060 . Apparently it does not. I remove the check from the obitalk settings and typed 5060 in the proxy server port.
|