|
Title: Set SP1 and SP2 to produce the same ring tone Post by: tpl-inc on February 23, 2016, 04:03:49 pm Hi All,
I have a Obi200 and I would like to have both SP1 and SP2 (2 different GV account) to produce the same standard ring tone. I have a PBX box that only pick up call on standard ring tone. Can I do that? How? Thanks, Title: Re: Set SP1 and SP2 to produce the same ring tone Post by: SteveInWA on February 23, 2016, 05:23:04 pm Hi:
Log into your OBiTALK portal page, select your OBi 200, get into Expert configuration mode, and go to Voice Service, SP2, and find X_RingProfile. Change it from "B" to "A". Look at X_DefaultRing, and ensure it is set to 1. Scroll down to the bottom of the page and click Submit to save your change. This will tell the device to use the same ring profile and same ring pattern as SP1. Note that, to change these settings, you must UNcheck both boxes to the right of the setting. |