we have changed our ISP and in trying to reconnect, we are prompted to install an update or read a .fw file and I cannot open it.... aaarrggg.
Using Win10. I have a green dot on the dashboard next to the device. I keep trying to send the ** 5 number and it also does not accept my password. I tried admin and it doesn't work either.
please help and thank you!
https://www.dslreports.com/forum/r30768637-READ-THIS-before-you-pay-10-to-Obihai-for-support
I keep reading and found this and SNAP.... this did it! Works great. Should be top/center very important post here. Someone found it, shared it and so thankful I found it too. Thanks guys!! PS: I didn't have to reboot, but I did click on the reboot link once I got on that page.
>>>>>.................
Found the solution on another thread for the Obi100.
Download this firmware for the Obi110 http://fw.obihai.com/OBi110-1-3-0-2886.fw
(Yes, I know its for the Obi110 but it will work in the Obi100).
Then Reboot.
If you don't know how to install the firmware:
Dial * * * 1
It will give you the IP Address: 192.168.XXX.XXX (example 192.168.1.27 )
In your browser, enter the IP Address as the URL.
User Name: admin
password: admin
On the left side, navigate to SYSTEM MANAGEMENT
Click DEVICE UPDATE
At the top where it says "Firmware Update
Select file to update firmware [BROWSE] ...."
Click BROWSE and add the file. Then click UPLOAD
Once it reboots its done.
In the obitalk portal, you can delete the old device and add a new device. Its should work with Google Voice using OAuth.