Print Page - No CallerID on LINE port

Title: No CallerID on LINE port
Post by: NerdUno on February 07, 2011, 08:32:26 AM

Incoming calls on the LINE port don't seem to pick up CallerID. Any ideas ???

Title: Re: No CallerID on LINE port
Post by: LeftRight on February 07, 2011, 09:18:58 AM

You may take a look at this thread -- http://www.obitalk.com/forum/index.php?topic=95.0

If your OBi unit is in US, you might check "RingDelay" setting on LINE port, and make sure it has sufficient time ( > 3500ms) for OBi110 to collect caller ID.

Title: Re: No CallerID on LINE port
Post by: OBi-Guru on February 07, 2011, 09:47:59 AM

Looks like you have similar issue as Northern.Bob with the PSTN line callerID not displaying:

http://www.obitalk.com/forum/index.php?topic=95.0

Please send email to support@obihai.com with your OBi number. Support might be able to provide a new firmware to cure this issue.

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: NerdUno on February 07, 2011, 08:32:26 AM