OBiTALK Community

General Support => Day-to-Day Use => Topic started by: nickforum on September 21, 2017, 04:47:11 AM

Title: Auto-Update, Auto-provisioning, confused
Post by: nickforum on September 21, 2017, 04:47:11 AM
i have been reading about auto-update, and auto-provisioning.
I went to the WEB OBITALK control panel, obi-expert.
there, my AUTO-PROVISIONING is GREYED OUT for METHOD, and is at DISABLED.
teh HELP button at the TIME INTERVAL indicates that it DOES CHECK for update, on SYSTEM START??

does this mean that if I turn the unit OFF, then back ON, it will CHECK for update?

AND, how come my option is GREYED OUT, and how to enable it?

any help appreciated
thanks
Title: Re: Auto-Update, Auto-provisioning, confused
Post by: azrobert on September 21, 2017, 11:56:03 AM
You need to uncheck both boxes to the right of the value to view or change the current value. A red ! immediately to the right of the value indicates the value has changed from the default.
Title: Re: Auto-Update, Auto-provisioning, confused
Post by: nickforum on January 02, 2018, 06:15:36 AM
thanks for reply, I did what you said, and see the attached.  I THOUGHT I had it right.  but a couple weeks ago, the OBI stated it was not able to connect.  (in its robot voice)
I then tried the sTAR-star-star-6, on the phone, and it did a new update.
BUT, see screen shot, this is hwat I had set up, per prior reply.  Why did that not trigger the update?
is my time setting an issue?
thanks
Title: Re: Auto-Update, Auto-provisioning, confused
Post by: nickforum on January 19, 2018, 07:25:27 AM
just re-checking, any feedback on my question,as to why the box does not seem to auto-update?
thanks