OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: neilio on August 08, 2011, 06:19:11 AM

Title: Outgoing proxy set up - how?
Post by: neilio on August 08, 2011, 06:19:11 AM
Hi all -

Related to an earlier thread I started on setting up outgoing proxies w/ voice gateways (http://www.obitalk.com/forum/index.php?topic=1306.0) (it can't be done) - has anyone had success setting up a SIP account on the OBI using an outgoing proxy, such as Milkfish (running within DD-WRT)?

I'm trying to work around NAT issues and I'm not sure if I'm setting up OBiTALK incorrectly or not. Here's my settings:

(http://cl.ly/97MP/SIP1.png)

When I use this setting Milkfish registers correctly with Callcentric, but OBiTALK shows SIP1 with an error "407   Proxy Authentication Required" and the proxy address as 10.0.0.111:5060. I can get my soft phone to register correctly using Milkfish so I'm not sure what I'm doing wrong for the OBI.

Any tips are much appreciated!