OBiTALK Community

General Support => Day-to-Day Use => Topic started by: frozencustard on December 24, 2017, 08:15:56 PM

Title: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: frozencustard on December 24, 2017, 08:15:56 PM
This phone (EL52333 Dect 6.0 3 Handset Cordless) is not ringing when the google voice number is called. Outgoing calls from the phone work perfectly. This same exact setup worked great with Obi100 and when I switched out the Obi100 to Obi200 (and set it up) the phone no longer rings.

If I have the forwarding option in google voice set to dial a mobile phone, that mobile phone will ring. Also if I have a browser open, the google chat/hangout will ring. But for whatever reason, the phone that is connected to the Obi200 will not ring no matter what I do.

I have verified that the phones still ring like normal when I hooked the Obi100 back up and set it up (using the simonics 'hack'). Does anyone have any ideas why the phones won't ring with the Obi200?
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: drgeoff on December 25, 2017, 02:37:27 AM
The most common reasons are Google Chat not ticked, a Ring Schedule in operation or being logged in to the wrong Google account when setting up the OBi.

You can check if the calls are reaching the OBi.  Dial ***1 and note the IP address that is read out to you.  Put that in a browser and log in with admin and admin (or whatever if you changed from that default) as user and password.  Click on Status, then on Call History.  Do the non-ringing inbound calls appear there?
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: frozencustard on December 25, 2017, 11:58:28 AM
Thank you for your response drgeoff. Google Chat is ticked, I'm not sure what Ring Schedule in operation is. Google account is correct and just to be sure I removed the device from the obitalk dashboard and did a factory reset of the Obi200. I then re-added the Obi200 and setup Google Voice again using the account with my google voice number (making sure that the only google account that was logged in was the one with the google voice number).

I logged into the Obi device via browser and in the Call history none of the non-ringing inbound calls appear there.

For what it's worth, the above steps (about removing the device @ obitalk, etc.) when done with the Obi100 works flawlessly for incoming calls to ring on the phone in question. The same steps result in zero incoming calls on the Obi200.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: SteveInWA on December 25, 2017, 12:19:35 PM
Using the OBi 200 that you set up with Google Voice, make a call to some other phone number.  On that other number's phone, look at its caller ID display.  Is it showing the correct Google Voice number?
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: frozencustard on December 25, 2017, 12:31:56 PM
Quote from: SteveInWA on December 25, 2017, 12:19:35 PM
Using the OBi 200 that you set up with Google Voice, make a call to some other phone number.  On that other number's phone, look at its caller ID display.  Is it showing the correct Google Voice number?

Thank you for your response SteveInWA. I just tried using the phone that is hooked up to the Obi 200 and made a call to my cell phone. On my cell phone, the caller ID display successfully shows the Google Voice number.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: SteveInWA on December 25, 2017, 12:37:07 PM
Follow my instructions here:  https://www.obitalk.com/forum/index.php?topic=13392.msg86178#msg86178 (https://www.obitalk.com/forum/index.php?topic=13392.msg86178#msg86178)
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: frozencustard on December 25, 2017, 10:08:35 PM
Quote from: SteveInWA on December 25, 2017, 12:37:07 PM
Follow my instructions here:  https://www.obitalk.com/forum/index.php?topic=13392.msg86178#msg86178 (https://www.obitalk.com/forum/index.php?topic=13392.msg86178#msg86178)

Thank you again for your assistance.

I deleted the SP1 service proider (google voice) so it became Not Configured. I then waited around 5 minutes just to make sure everything was good to go then opened a new tab while leaving the obitalk tab open. In that tab I sent to the google voice link your instructions provided and logged in to the Google Voice number google account. At the top of the link provided, my Google Voice number is present. Under the call section, I unchecked fowarding to my cell phone number.

I then went to myaccount.google.com and clicked the Manage Apps link. The two that were present are Obitalk and Simon Telephonics. I removed both of them. I left that tab open (after going back to google voice page) and switched to the Obitalk tab. I then clicked SP1, clicked the Google Voice setup option (making sure to choose my Google Voice google account). I then waited for around 5 minutes again just to make sure everything was good to go. The status of SP1/Goolge Voice was "Connected".

I then called my Google Voice number using my cell phone (AT&T network). The phone attached to the Obi200 failed to ring. I then got a friend to call my Google Voice number (C Spire network). The phone attached to the Obi200 failed to ring. I closed out the Google Voice tab and repeated the process, but the results were the same. I then went back to google voice and turned back on call forwarding to my cell phone so that at least I can still receive 'house' calls until I get this sorted out.

I'm going to try and find another phone to rule out any compatibility issue with the Obi200 but there wouldn't seem to be since this same setup works with the Obi100.

EDIT: I have since tried another phone I found in my shed. Same exact results as the other phone - it makes calls phone, but will not ring when someone calls the Google Voice number. At this point I have no other ideas.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: SteveInWA on December 26, 2017, 02:34:53 PM
Plug your OBi 100 into power, Ethernet, and one of your two telephones and boot it up.  It should have a dial tone.  Turn over the OBi 200 and write down the 9-digit OBi number on the label.  Call that number from the OBi 100, prefacing it with **9, like this:  **9 xxx xxx xxx

The 200 should ring, and you should be able to answer the call.  If it doesn't work, then something is wrong with your telephone, or (unlikely) the ring circuitry in the 200.

If it works, try calling the 100 from the 200 and confirm that the phone attached to the 100 rings.

The goal of this exercise is to determine whether the 200 and its attached telephone are fully working.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: DGinDraft on December 27, 2017, 12:34:58 PM
I am having this exact same problem with my new Obi 200.  I previously had a 100 that stopped working.  After trying to use Simonics (unsuccessfully), I broke down and bought a 200.  I was able to receive incoming calls immediately after I set it up, but is stopped working the 2nd day and hasn't worked since.  Outgoing calls work fine.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: frozencustard on December 27, 2017, 02:28:26 PM
Quote from: SteveInWA on December 26, 2017, 02:34:53 PM
Plug your OBi 100 into power, Ethernet, and one of your two telephones and boot it up.  It should have a dial tone.  Turn over the OBi 200 and write down the 9-digit OBi number on the label.  Call that number from the OBi 100, prefacing it with **9, like this:  **9 xxx xxx xxx

The 200 should ring, and you should be able to answer the call.  If it doesn't work, then something is wrong with your telephone, or (unlikely) the ring circuitry in the 200.

If it works, try calling the 100 from the 200 and confirm that the phone attached to the 100 rings.

The goal of this exercise is to determine whether the 200 and its attached telephone are fully working.

I called the Obi 200 from the Obi 100 and the phone hooked up to the Obi 200 rang. I then called the Obi 100 from the Obi 200 and the phone hooked up to the Obi 100 rang. I was able to answer both calls and hear the conversation on both phones. So it appears they are fully working, at least when dealing with Obi talk calls. But the Obi 200 still isn't able to ring the attached phone from incoming Google Voice calls. The Obi 100 with the simonics gateway thing is still working to receive calls (and phone rings).
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: Jackson on December 28, 2017, 08:24:11 AM
Try this from Google forums.  Not exactly your problem, but WTH.

Quote
Jun 6
jkhajh said:
It is working now. Turns out, it wasn't the freetalk. Neither was it the OBi device. It was on the GV side of things, as I originally thought (since I could make outgoing calls just fine with both freetalk and Obi device).

Here's the solution: To make my phone receive incoming calls, I had to go into GV settings and click "transfer" my number and then check the "google chat" box. Simple as that. Now I have no idea why this GV setting had changed, since I hadn't changed it. But it's working fine now.

So as it turns out, I didn't need to replace the freetalk device...although I suppose moving to a supported device isn't a bad thing (but it did cost me unnecessarily).

PS. I contacted obi support, and they figured out right away the problem and even sent me detailed instructions on how to fix it (although I had in the meantime already solved the problem). Very impressive customer support.

Thank you everyone who posted for helping me to solve the problem.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: frozencustard on December 28, 2017, 11:53:22 AM
Quote from: Jackson on December 28, 2017, 08:24:11 AM
Try this from Google forums.  Not exactly your problem, but WTH.

I appreciate the suggestion but clicking Transfer only pops up the option to transfer your GV number to another destination account that doesn't yet have a google voice number. The Google chat option setting is available on the [Phones] tab on the GV legacy settings page and it is checked. I did, just for curiosity sake, uncheck the option and recheck it, but that resulted in no change.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: Jackson on December 29, 2017, 04:08:12 AM
Here's the thread.

https://productforums.google.com/forum/#!topic/voice/-3_PDgMYVCo
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: SteveInWA on December 29, 2017, 02:46:43 PM
That answer was incorrect.  As frozencustard also points out, "Transfer" has nothing whatsoever to do with OBi operation; "Transfer" does not mean "Forward".  "Transfer" has only one purpose:  move a Google Voice inbound telephone number from one Google (Gmail) account to a different Google account.  The only useful thing in that thread was that the user needed to enable forwarding to Google Chat by check-marking the box next to it in settings.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: 77obinewbie on February 03, 2018, 05:56:03 PM
Quote from: Jackson on December 28, 2017, 08:24:11 AM
Try this from Google forums.  Not exactly your problem, but WTH.

Quote
Jun 6
jkhajh said:
It is working now. Turns out, it wasn't the freetalk. Neither was it the OBi device. It was on the GV side of things, as I originally thought (since I could make outgoing calls just fine with both freetalk and Obi device).

Here's the solution: To make my phone receive incoming calls, I had to go into GV settings and click "transfer" my number and then check the "google chat" box. Simple as that. Now I have no idea why this GV setting had changed, since I hadn't changed it. But it's working fine now.

So as it turns out, I didn't need to replace the freetalk device...although I suppose moving to a supported device isn't a bad thing (but it did cost me unnecessarily).

PS. I contacted obi support, and they figured out right away the problem and even sent me detailed instructions on how to fix it (although I had in the meantime already solved the problem). Very impressive customer support.

Thank you everyone who posted for helping me to solve the problem.

I had obi100 that stopped working in December.  I got Simon Telephonics and that got the obi100 working.  However, my wife keeps complaining that there is a long lag when picking up calls and that was driving her crazy.  I bought obi200, hoping it would solve the problem.  When I thought I finished setting it up, I found out that incoming calls would not ring.  I spent at least 2 hours searching for solutions and nothing would work.  Finally came across this Transfer and check chat box suggestion.  It sounds so simple but it actually worked!!!  Thanks a lot.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: drgeoff on February 04, 2018, 02:41:06 AM
Quote from: 77obinewbie on February 03, 2018, 05:56:03 PM
Quote from: Jackson on December 28, 2017, 08:24:11 AM
Try this from Google forums.  Not exactly your problem, but WTH.

Quote
Jun 6
jkhajh said:
It is working now. Turns out, it wasn't the freetalk. Neither was it the OBi device. It was on the GV side of things, as I originally thought (since I could make outgoing calls just fine with both freetalk and Obi device).

Here's the solution: To make my phone receive incoming calls, I had to go into GV settings and click "transfer" my number and then check the "google chat" box. Simple as that. Now I have no idea why this GV setting had changed, since I hadn't changed it. But it's working fine now.

So as it turns out, I didn't need to replace the freetalk device...although I suppose moving to a supported device isn't a bad thing (but it did cost me unnecessarily).

PS. I contacted obi support, and they figured out right away the problem and even sent me detailed instructions on how to fix it (although I had in the meantime already solved the problem). Very impressive customer support.

Thank you everyone who posted for helping me to solve the problem.

I had obi100 that stopped working in December.  I got Simon Telephonics and that got the obi100 working.  However, my wife keeps complaining that there is a long lag when picking up calls and that was driving her crazy.  I bought obi200, hoping it would solve the problem.  When I thought I finished setting it up, I found out that incoming calls would not ring.  I spent at least 2 hours searching for solutions and nothing would work.  Finally came across this Transfer and check chat box suggestion.  It sounds so simple but it actually worked!!!  Thanks a lot.
Google Chat not ticked was the first reason given in the first reply in this thread.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: SteveInWA on February 04, 2018, 04:40:13 PM
Quote from: drgeoff on February 04, 2018, 02:41:06 AM
Quote from: 77obinewbie on February 03, 2018, 05:56:03 PM
Quote from: Jackson on December 28, 2017, 08:24:11 AM
Try this from Google forums.  Not exactly your problem, but WTH.

Quote
Jun 6
jkhajh said:
It is working now. Turns out, it wasn't the freetalk. Neither was it the OBi device. It was on the GV side of things, as I originally thought (since I could make outgoing calls just fine with both freetalk and Obi device).

Here's the solution: To make my phone receive incoming calls, I had to go into GV settings and click "transfer" my number and then check the "google chat" box. Simple as that. Now I have no idea why this GV setting had changed, since I hadn't changed it. But it's working fine now.

So as it turns out, I didn't need to replace the freetalk device...although I suppose moving to a supported device isn't a bad thing (but it did cost me unnecessarily).

PS. I contacted obi support, and they figured out right away the problem and even sent me detailed instructions on how to fix it (although I had in the meantime already solved the problem). Very impressive customer support.

Thank you everyone who posted for helping me to solve the problem.

I had obi100 that stopped working in December.  I got Simon Telephonics and that got the obi100 working.  However, my wife keeps complaining that there is a long lag when picking up calls and that was driving her crazy.  I bought obi200, hoping it would solve the problem.  When I thought I finished setting it up, I found out that incoming calls would not ring.  I spent at least 2 hours searching for solutions and nothing would work.  Finally came across this Transfer and check chat box suggestion.  It sounds so simple but it actually worked!!!  Thanks a lot.
Google Chat not ticked was the first reason given in the first reply in this thread.

and "transfer" has nothing to do with this.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: spoiledsport on February 07, 2018, 11:11:47 AM
Guys

I am having the exact issue. I have a couple of OBi110. They stopped working (like everyone else's). I went and bought a OBi200 from NewEgg. I plugged the thing, configure it for GV and made some outbound calls, but no incoming calls whatsoever.

Now, I tried the whole deleting of the chat thing in GV application to no avail. In the meantime, I have the OBi110 working with Simon Telephonics. That tells me that the problem couldn't be in GV. I am receiving incoming calls in the OBi110. I have both configured and plugged in.

When I call from another phone, both my cell (configured as my primary number on GV) and the OBi110 ring, but the OBi200 does not.

Any ideas? I read all I could about this and I haven't seen any real answers. There are already several reports of this.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: SteveInWA on February 07, 2018, 02:32:28 PM
Quote from: spoiledsport on February 07, 2018, 11:11:47 AM
Guys

I am having the exact issue. I have a couple of OBi110. They stopped working (like everyone else's). I went and bought a OBi200 from NewEgg. I plugged the thing, configure it for GV and made some outbound calls, but no incoming calls whatsoever.

Now, I tried the whole deleting of the chat thing in GV application to no avail. In the meantime, I have the OBi110 working with Simon Telephonics. That tells me that the problem couldn't be in GV. I am receiving incoming calls in the OBi110. I have both configured and plugged in.

When I call from another phone, both my cell (configured as my primary number on GV) and the OBi110 ring, but the OBi200 does not.

Any ideas? I read all I could about this and I haven't seen any real answers. There are already several reports of this.

There is a hint in your post; without it, I doubt we'd figure it out.  You said you were using the Simonics Google Voice Gateway (GVGW).  When you do that, it takes priority over the other clients connected to that Google account, and the other clients won't ring. 

Go to your GVGW web page, and disable the service.  Your OBi 200 attached phone(s) should now ring on inbound calls.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: Taoman on February 07, 2018, 03:00:30 PM
Quote from: spoiledsport on February 07, 2018, 11:11:47 AM

When I call from another phone, both my cell (configured as my primary number on GV) and the OBi110 ring, but the OBi200 does not.


If using the Simonics GV gateway you would need to register your OBi200 to the same account (as your 110) with a different prefix/login.

http://support.simonics.com/support/solutions/articles/3000031438-what-is-the-sip-login-prefix- (http://support.simonics.com/support/solutions/articles/3000031438-what-is-the-sip-login-prefix-)
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: GPz1100 on February 07, 2018, 04:18:29 PM
@Steve, it is possible to change the priority for the gvgw registration.  Default is 127 (highest). 

There's usually little/no reason to change this.  I had mine lowered to prevent conflict with freepbx/motif. If the gw was logged into and so was motif, last one to log in would be the one to receive inbound calls.  With the lower priority, if the pbx goes down then the gateway takes over.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: SteveInWA on February 07, 2018, 04:26:37 PM
I'm aware of that.  I'm also aware that there are two different audiences here in the forum:  the technically-savvy, DIY people who love playing with PBXs and configuring software, and the basic users who have simply seen the OBi products advertised or heard a friend or neighbor mention them.  The latter group is by far the largest, and the source of most of the "newbie" questions.  When I see a post from a user who appears to just be trying to get their purchased magic mystery box to work, I try to steer them to the least-complex answer, and one that they won't need to come back in a year and say "how the heck did I get to do that before <insert event here, like the box died, or they wiped out the advanced settings, or were too lazy to write down whatever setting they were told to change, etc.>?"

By Obihai's guestimate, there might be a thousand or two advanced OBi users, vs. millions of basic consumers and business customers, and an even smaller number of advanced users experimenting with non-OBi solutions such as PBXs.

Thanks for mentioning the setting.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: spoiledsport on February 08, 2018, 01:18:51 PM
Is there any way for me to keep both? Can I change the priority or something. I haven't replaced all my OBi110s. I have some in my other place. The surprising thing is that every time I re-register the OBi200, I get the first incoming call, but not the subsequent ones.

I will try disabling for the time being and see what happens. I will prefer to change priority (if possible).
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: GPz1100 on February 08, 2018, 01:23:07 PM
On the obi2xx units there's a setting under Voice services/SPx Service/Calling Features/X_XMPPPriority .  You could try adjusting that.  For the 1xx units with simonics gateway, you'll have to open a ticket to get that changed.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: SteveInWA on February 08, 2018, 01:36:57 PM
I don't know what XMPP priority the Simonics GVGW is using; again, the reason your devices aren't ringing is because the GVGW is grabbing the priority.  Rebooting the device(s) is simply and temporarily giving the last device to connect to the Google XMPP server the priority, but it will be superseded as soon as GVGW re-connects.

You would have to a) find out from Bill Simon what priority GVGW is using, and b) if it the highest, then lower it to some level, and then c) enter a higher level on the OBiTALK portal for your OBi, in "expert configuration" mode, and then d) write this down, so you don't come back here in a year and ask how to do it again.  I have not tried this myself, so, while it may work in theory, the only way to prove it works is to try it.

From the OBiTALK dashboard, click on your OBi 20x device(s).  Get past the various links and buttons and warnings, to get into expert configuration mode, then go to "Voice Services", and click on the SPx that you are using for Google Voice (SP1--SP4), then scroll down to the calling features section, then remove BOTH check marks to the right of the following value, and then enter the desired priority, and then click "Submit" at the bottom of the page.

See the screenshot below.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: spoiledsport on February 08, 2018, 01:42:50 PM
Thanks for all this information. It really helps me understand how this work. I just head out to the Simon GW web site to see how the priority this is configured. I see the following

XMPP priority 127: Previously, all GVGW accounts were set at standard priority 20, which allowed other Google Talk/Chat programs to "override" the login and intercept incoming calls. (For example, if you opened GMail chat on the same account as your Google Voice number registered on the GVGW, incoming calls would ring on GMail chat and not on the gateway.) Having received a lot of feedback on this, I've set the default priority to 127 (highest) for all new registrations. With that, all Google Voice calls should hit the gateway, even if you open other Google Talk clients on the same account.

That means that I am basically done. I will send an email to request for this priority to be changed for my device. I would really love to both devices ringing for incoming calls. Could I set the same priority for the OBI200? Would that allow for both connections to ring on incoming calls?

Once again, thanks for all your help.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: SteveInWA on February 08, 2018, 01:44:49 PM
You will have to work it out with Bill Simon.  127 is the highest priority.  You cannot set the OBi to the same value and expect it to work.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: GPz1100 on February 08, 2018, 02:17:03 PM
Having both set to the same priority will not work.  It's one or the other.  If the higher priority device is offline then the next one in the list gets the call.

The work around to ring both devices is to use an intermediary such as callcentric.  You establish an account with them then add one of their free NY DID products.  The assigned number is irrelevant.  No one will ever see it or use it.  

The obi not using the gateway will need to have the callcentric sip credentials configured in one of the SPx slots.  If it's a 202 model, you'll need to configure which phone port you want that spx slot to ring for inbound calls.

Make some test calls to the DID yourself (using another phone) to make sure your obi is properly configured to receive calls.  Then add the callcentric DID (note, it's not a number starting with 1777xxxxxx - that's your callcentric account number) to google voice as a forwarding number.  Google will make a test call to it to validate.

When all is said and done, both devices will ring for incoming calls to that gv #.  The one using the gateway profile will likely ring before the callcentric because it's a more direct path.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: azrobert on February 08, 2018, 02:58:49 PM
Quote from: spoiledsport on February 08, 2018, 01:42:50 PM
I would really love to both devices ringing for incoming calls.

I have a question for you. I own an OBi110 that stopped working, but it started working on December 19th and is still working. Have any of your OBi110s started working again?
See:
http://www.obitalk.com/forum/index.php?topic=13360.0

There is a very easy fix to get both boxes to ring. After lowering the GVGW priority, you can then modify the OBi200 inbound route to ring the phone port and also send the call over the OBiTalk network to the OBi110. Use OBi Expert to make the following changes:

OBi200
Voice Services -> SPx Service -> X_InboundCallRoute: ph,pp(200123456)

Replace 200123456 with the OBi number of the OBi110.

OBi110
Voice Services -> OBiTalk Service -> InboundCallRoute: ph

This is the default, but the setup process might have changed it.

_____________________________________

Have you tried/understood Taoman's suggestion?
http://www.obitalk.com/forum/index.php?topic=13398.msg87037#msg87037

Delete the GV trunk on the OBi200 and then register the OBi200 to the same GVGW account. Use a suffix on the OBi's AuthUserName. Use GV18005551212x1 on one box and GV18005551212x2 on the other. Both boxes should now receive inbound calls.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: spoiledsport on February 08, 2018, 03:04:43 PM
I haven't try my OBI110s without the Simon Gateway.  I will try that tonight and let you know.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: GPz1100 on February 08, 2018, 03:43:08 PM
@azrobert  Am I correct in understanding that your method requires obitalk to be accessible and working?  I probably didn't think of your method as i'm used to fully disabling and blocking obitalk.

As always, several ways to achieve a similar end result.
Title: Re: Phone connected to Obi200 Not Receiving Incoming Calls (Google Voice)
Post by: drgeoff on February 08, 2018, 04:56:32 PM
Quote from: GPz1100 on February 08, 2018, 03:43:08 PM
@azrobert  Am I correct in understanding that your method requires obitalk to be accessible and working?
Yes and yes.