I have a obi 202. I have set up google voice with no problem. What I would like to do is. All local calls go through google voice and all international calls go through a different voip provider.
I would like it so the when the user dials 011 obi routes the number to that voip provider(betamax). I don't need to receive any calls from this voip it will only have outgoing calls.
Thanks for your help.
Use OBi Expert to make following change
Physical Interfaces -> Phone1 Port
Add the following to the beginning of the OutboundCallRoute:
{(011xx.):sp2},
The above assumes Betamax is defined on SP2.
If needed, do same for Phone2
Thanks. I will try this when I get home.
Quote from: azrobert on January 02, 2018, 10:39:47 AM
Use OBi Expert to make following change
Physical Interfaces -> Phone1 Port
Add the following to the beginning of the OutboundCallRoute:
{(011xx.):sp2},
The above assumes Betamax is defined on SP2.
If needed, do same for Phone2
Hi Azrobert. this did not work. After putting this code. I can not make local or long distance calls. I get a message the number you dialed xxxxxx has not received a response from the service provider. Can you help.
Thanks
Post what you have now as the OuBoundCallRoute for the relevant phone port.
Quote from: drgeoff on January 08, 2018, 01:35:04 AM
Post what you have now as the OuBoundCallRoute for the relevant phone port.
Thanks for your help. I have reset the device and set up GV and betamax and put the dial rule again and it worked. The only thing I had to do was to uncheck Phone Line 1 from the SP2. Without it everything when through the SP2. It seems to be working now. Thanks.