Hello folks,
I have searched back a year or so but suspect not using the correct terminology so can't find how to:
Forward all analog calls out on Obi200#2 to Obi200#1. These are 10 digit calls only.
Current state:
Both devices (#1 and #2) are behind firewalls on internet in separate locations.
Obi200#1 is setup on GV and working fine. (Can receive and place analog calls)
Suspect a dial plan but not sure where to start.
Thanks in advance for any suggestions or pointers. I am not completely new to this but close.
After further searching, on and off this site, it seems like this might be done via connecting both Obi200#1 and Obi200#2 to the same google voice account and all should be fine.
Seems like ObiPlus, a $$$ service, is needed to do it with an outbound dial plan and maybe a Voice Gateway? Main determinant seems to be two networks involved.
Still looking....
You can route the call over the OBiTalk network to OBi200#1 at no charge. As you posted, the same GV account can be defined on both devices.
Thanks....the dual GV approach seems to be working.
Even got a ObiWifi5G and running on a Verizon hotspot.
Very nice products.