OBiTALK Community

General Support => On-Topic: Obihai and OBi Products => Topic started by: Redw00d on July 19, 2018, 12:47:20 PM

Title: no dial tone obi200
Post by: Redw00d on July 19, 2018, 12:47:20 PM
no dial tone on new obi200... wrote a long story, but, it didn't load... sigh
Title: Re: no dial tone obi200
Post by: shap on July 20, 2018, 08:29:40 AM
Try to revert to old firmware - 5859EX - solved the problem for me. You will need to disable auto provisioning to stay on this firmware.
Title: Re: no dial tone obi200
Post by: shap on August 16, 2018, 01:50:28 PM
I found the problem - check your primary line on phone port - set it to SP1. In my case it was set to Trunk 1 and that caused the problem. Seems like a bug.
Title: Re: no dial tone obi200
Post by: EricHillis on August 18, 2018, 10:20:08 PM
Thanks for the suggestion(s) .. my Phone Port was already set to SP1 Service, so that isn't the problem in my case.
Title: Re: no dial tone obi200
Post by: Soulcommander on August 23, 2018, 02:57:27 PM
Im having same issue on Port 2 of Obihi 202...NO dial tone but calls are getting forwarded to my cell ok.
Port 1 for my other number is just fine and working correctly. Port 2 does have a solid green light port 1 has a flashing green light. Power light is solid green.

Any thoughts?

Thanks!
Title: Re: no dial tone obi200
Post by: drgeoff on August 23, 2018, 05:15:19 PM
Note to other prospective helpers.

Please do not reply to Soulcommander here.  He has two other threads (one a hijack, one his own) open about his problem.