|
Title: Need help setting up a SPA941 Cisco phone [RESOLVED] Post by: Fox_Spellcaster on August 13, 2018, 05:03:49 am I have a SPA941 Cisco that I been trying to set up for the last two weeks on my OBI200 system. I have been able to get a wired phone on the system with my google voice number and its ability to work so my box is working fine.
I did find a PDF online (OBi-VoIP-Device-Attach-Legacy-IP-Phone-Workbook-v1-0) and in reading that I was able to get a softphone on my computer working. and in using that info I was able to get an app on an old cell phone of mine working on my wifi. I thought I could use that same info and get the Cisco phone working... but no luck. I do have a FreePBX system on my local network that the cisco phone can register with. So I belive the phone is working fine. I am just not able to get it to talk with my OBi200 system. Here is some places were I got my info at: https://voxilla.com/2011/02/15/how-to-obify-your-ip-phone-no-asterisk-involved/ http://www.obitalk.com/forum/index.php?topic=14121.0 Title: Re: Need help setting up a SPA941 Cisco phone Post by: drgeoff on August 13, 2018, 05:38:54 am Please delete the other duplicate of your post so that all discussion is contained in this thread.
The later versions of OBi200/202 firmware that support the current incarnation of GV have a bug or feature that prevents some IP phones from being able to register to them. See previous discussions eg http://www.obitalk.com/forum/index.php?topic=14002.0 Title: Re: Need help setting up a SPA941 Cisco phone Post by: Fox_Spellcaster on August 13, 2018, 06:02:19 am sorry about that. I was getting an error on the site saying that it did not post.
I will look at what you posted. Thank you. Title: Re: Need help setting up a SPA941 Cisco phone Post by: Fox_Spellcaster on August 14, 2018, 05:48:35 am I think I am getting someplace now. Since I setup the phone so it is not registered it will work. But eveytime I try to dial out it only calls ph1 I think I don't have the InboundCallRoute setup right. But I don't know what one I should change.
my setup is like likes: SP1 Service my google voice SP3 my Cisco phone. SP4 My softphone Title: Re: Need help setting up a SPA941 Cisco phone Post by: drgeoff on August 14, 2018, 06:04:58 am I think I am getting someplace now. Since I setup the phone so it is not registered it will work. But eveytime I try to dial out it only calls ph1 I think I don't have the InboundCallRoute setup right. But I don't know what one I should change. As per http://www.obitalk.com/forum/index.php?topic=12492.msg80303#msg80303my setup is like likes: SP1 Service my google voice SP3 my Cisco phone. SP4 My softphone "OBi200: Service Providers -> ITSP Profile D SIP -> ProxyServer: 127.0.0.1 Service Providers -> ITSP Profile D SIP -> X_SpoofCallerID: Checked Voice Services -> SP4 Service -> AuthUserName: OBi200 Voice Services -> SP4 Service -> AuthPassword: OBi200PW Voice Services -> SP4 Service -> X_RegisterEnable: Unchecked Voice Services -> SP4 Service -> X_ServProvProfile: D Voice Services -> SP4 Service -> X_Proxy: Checked Voice Services -> SP4 Service -> X_InboundCallRoute: {OBi200>(Msp1):sp1} The above will route outbound calls to SP1" You modify the above: 1. You are using SP3 (and presumably Profile C) for the Cisco phone. 2. Do not have X_Proxy checked. Title: Re: Need help setting up a SPA941 Cisco phone [RESOLVED] Post by: Fox_Spellcaster on August 14, 2018, 09:34:41 am I was able with your help get the line working but then I got a new error. (488 Not Acceptable Here) But I did some searching on here and was able to find a thread at http://www.obitalk.com/forum/index.php?topic=13489.msg89474#msg89474 where they had a same problem with a cisco phone. and what they did worked for me also.
Thank you for your help drgeoff |