|
Title: Off Hook/On Hook issue Post by: cheseco12 on October 25, 2018, 06:31:18 am Full disclosure, I'm a newbie to this, I set up my Obi200 per instructions. With the phone line plugged in to the device, the phone green light flashes and I have no dial tone. When I open the Obi200 IP address under Status/PHONE Port Status, it shows the device is "off hook". If I unplug the phone cord from the Obi200 the status shows "on hook". I then plug the phone cord in again and I can get a dial tone on my cordless phone. I can then make a call to my cell phone if I make the call within 10-15 seconds otherwise the phone goes dead as a normal phone does when left off the hook without dialing a number within a few seconds.
แทงบอลชุด (http://www.ufa365.com/แทงบอลชุด/) I can NEVER make a call from my cell phone to my cordless home phone that is connected to the Obi200. It says the wireless customer I called is not available. สมัครแทงบอลชุด (http://www.ufa365.com/แทงบอลชุด/) Suggestions? Title: Re: Off Hook/On Hook issue Post by: drgeoff on October 25, 2018, 07:27:36 am Your first step should be to try another phone, preferably a standard corded one.
Title: Re: Off Hook/On Hook issue Post by: azrobert on October 25, 2018, 08:05:44 am Don't use your house wiring, plug the phone directly into your OBi.
|