OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: Sceva on November 10, 2011, 05:27:15 PM

Title: Testing 911 with 611
Post by: Sceva on November 10, 2011, 05:27:15 PM
I am trying to setup callcentric on SP2 for 911 calls.  I think everything is set up correctly but I wanted to make sure the map was correct. So I copied the 911 mask and made one for 611:

{611:sp2},{911:sp2},{([1-9]x?*(Mpli)):pp},{(<#:>|611):li},{(<#:>|911):li},{**0:aa},  {***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>  (Mpp)):pp},{(Mpli):pli}

When I call 611 I get a message from callcentric saying that is a special number and can't be accessed. So it appears the mask is correct.  Tomorrow I will see if I can test the 911 service anyway, as the whole reason I am setting this up is to make sure we can get thru in an emergency.