OBiTALK Community

Region Specific Technical / Service Provider Support => Australia, New Zealand and the Pacific Islands => Topic started by: ploo on November 07, 2021, 02:39:32 am



Title: Using OBI202 without OBITALK and Auto Attendant
Post by: ploo on November 07, 2021, 02:39:32 am
Hi

I just bought the OBI202 from US to set up my cordless phone connected to the NBN.

I prefer just to use the system to connect a phone line without necessarily using the options of OBITALK and Auto Attendant, such as having to dial the prefix ** 1 or have Auto Attendant answer my calls.

I don't seem to be able to uncheck the "Enable" for these services.  Whenever I reboot, the OBITALK Service Settings and Auto Attendant 1 are reverted to "Enable" checked.

Any assistance is much appreciated.

Thanks


Title: Re: Using OBI202 without OBITALK and Auto Attendant
Post by: drgeoff on November 07, 2021, 08:06:30 am
The number 1 gotcha for beginners. That's why there is a sticky about it. http://www.obitalk.com/forum/index.php?topic=61.0

Unless you disable Obitalk Provisioning, the settings on the OBitalk portal will override settings you make locally using the device's onboard webserver.  If you don't want to use the portal at obitalk.com, log in locally, navigate to System Management, Auto Provisioning and in the Obitalk Provisioning section change 'Method' to 'Disabled'.