OBiTALK Community

I'm over here in the UK, I haven't had much luck finding the exact dial tone profiles to match ours over here, not really a major problem. Does anyone know if there are any available?
I found some from the Sipura regional settings pdf

Dial tone: 350@­19,440@­22;10(*/0/1+2)
Ring back: 400@­20,450@­20;*(.4/.2/1+2,.4/2/1+2)
Busy tone: 400@­20;10(.375/.375/1)
Reorder tone: 400@­20;10(*/0/1)
SIT 1 tone: 950@­16,1400@­16,1800@­16;20(.330/0/1,.330/0/2,.330/0/3,0/1/0)
MWI dial tone: 350@­19,440@­22;10(.75/.75/1+2)
CWT1 cadence: 30(.1/2)

http://www.provu.co.uk/pdf/sipura/sipura_uk_regional_settings.pdf

I tried changing Dial Tone to 350-19,440-22;10 which I think has worked.
I'm looking for the "ringing tone" - I must be being pretty thick, what is the standard ringing tone called?

Thanks,
flipdee

larrybob has been doing the same thing for Brazil.  Maybe he can point you in a helpful direction:

http://www.obitalk.com/forum/index.php?topic=2015.0

Thanks for that,
I am stupid, of course it's the "Ring Back" tone I was looking for.
400@­20,450@­20;*(.4/.2/1+2,.4/2/1+2)
I'm just trying to convert this into a OBi recognisable format.
So far I have: 400-20,450-20;*(.4/.2/1+2,.4/2/1+2) however I believe the timings are causing issues.
I don't get a line light on the OBi110 or a dial tone when I insert the above line into Ring Back.

Not the end of the world. Just a pity the SPA format doesn't seem to be compatible.

Regards,
flipdee

Does this help?:

http://www.obitalk.com/forum/index.php?topic=2008.0

And maybe this?:

http://www.obihai.com/OBiAdminGuide.htm#_Toc304466466

Ok, so I'm pretty happy with these so far:

Dial Tone
350-19,440-22;10

Ringback Tone
400-20,450-20;-1;(.4+.2,.4+2)

Busy Tone
400-20;10;(.4+.4)

Technically the busy tone is .375 however I couldn't get the OBi110 to accept that.

Hope this helps some people.

Regards,
flipdee

Rubbish-After all that I just found this topic!

http://www.obitalk.com/forum/index.php?topic=384.0