OBiTALK Community

General Support => Day-to-Day Use => Topic started by: otherwhirl on December 15, 2011, 09:31:25 pm



Title: How does speed dial work with Obi 110 (screenshots)
Post by: otherwhirl on December 15, 2011, 09:31:25 pm
So i've entered a name and 7 digit number in my speed dial settings, but  i'm not certain how to activate speed  dial from my hand set side?

Is this something specific to my handset? Does the number in Obi speed dial settings correspond?

Help! ???


(http://img577.imageshack.us/img577/5697/picture2cg.png) (http://imageshack.us/photo/my-images/577/picture2cg.png/)


Title: Re: How does speed dial work with Obi 110 (screenshots)
Post by: RonR on December 15, 2011, 10:17:54 pm
Simply dial the one- or two-digit Speed Dial number (optionally followed by a # to eliminate the 9 second delay) to have the number contained in that slot dialed.


Title: Re: How does speed dial work with Obi 110 (screenshots)
Post by: otherwhirl on December 16, 2011, 01:17:33 pm
Hey I'm getting a "rejected by the service provider , reason 404..." error when I try to make the speed call...

This number is my 2nd GV number by the way....

Simply dial the one- or two-digit Speed Dial number (optionally followed by a # to eliminate the 9 second delay) to have the number contained in that slot dialed.



Title: Re: How does speed dial work with Obi 110 (screenshots)
Post by: RonR on December 16, 2011, 01:30:42 pm
Hey I'm getting a "rejected by the service provider , reason 404..." error when I try to make the speed call...

What does the OBi Call History show for the peer numbers on the failed call?

It appears you're entering a number as : (510) xxx-xxxx

You must enter numbers simply as : 15101234567


Title: Re: How does speed dial work with Obi 110 (screenshots)
Post by: otherwhirl on December 16, 2011, 08:20:04 pm
Hmmm , ok so i've configured both lines now ;D

I now also know how to make  a call from both separate lines accordingly from line 1 & 2 accordingly ;D

Thanks for your help thus far guys!

Thanks for your help thus far!
Hey I'm getting a "rejected by the service provider , reason 404..." error when I try to make the speed call...

What does the OBi Call History show for the peer numbers on the failed call?

It appears you're entering a number as : (510) xxx-xxxx

You must enter numbers simply as : 15101234567



Title: Re: How does speed dial work with Obi 110 (screenshots)
Post by: erdos on September 23, 2021, 06:51:31 am
Simply dial the one- or two-digit Speed Dial number (optionally followed by a # to eliminate the 9 second delay) to have the number contained in that slot dialed.


Great!  Solved my problem.