Text only | Text with Images

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: SimonD on December 22, 2011, 06:50:29 PM

Title: Ooma Telo Phone Port to Obi FXO - Caller ID Passed Correctly?
Post by: SimonD on December 22, 2011, 06:50:29 PM
I just got Ooma. Could someone with Ooma Telo (phone only port) and an Obi110 confirm that with the Ooma phone port connected to FXO of an Obi110 and DECT 6 phones connected to the Obi110 Phone port that Caller ID for calls to the Ooma get passed through correctly?

I need to get a new ATA since this setup causes Caller ID to fail when I connect the Ooma to either a UTStarcom or Azatel ATA FXO port (both unlocked former Lingo). I hadn't expected this issue as they worked fine with a current Lingo SPA2102-R connected to the old Lingo ATAs but for some reason the Ooma Caller ID doesn't get passed through.

Thanks in advance.
Title: Re: Ooma Telo Phone Port to Obi FXO - Caller ID Passed Correctly?
Post by: bryanlyle on January 10, 2012, 10:34:12 AM
In my set up is works sporadically.  I've tinkered with the RingDelay setting but it doesn't seem to make a difference.
Text only | Text with Images