Right now I have all calls going out through my PSTN line. I'd like to have all calls go out the PSTN EXCEPT two particular numbers. Those numbers I want to go through SP1. How do I do that? :)
Is it this easy?
In the phone OutboundCallRoute setting:
{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1))|155555555|14444444444:sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Where all calls would go out the primary line (in my case the PSTN) except for 15555555555 and 14444444444. Those would be routed through SP1 ?
Thanks!
There's a much better way to do it.
Instead, leave the PHONE Port DigitMap and OutboundCallRoute at Default and set:
Physical Interfaces -> LINE Port -> DigitMap:
([2-9]11|[2-9]xxxxxx|1xxxxxxxxxx|<**1>(14444444444|15555555555))
So, previously I had the default DigitMap:
(xxxxxxxS4|1xxxxxxxxxx|xx.)
Replace that entire string with what you posted?
Or would something like this work?
(<**1>(15555555555|14444444444)|xxxxxxxS4|1xxxxxxxxxx|xx.)
Quote from: bryanlyle on January 08, 2012, 03:08:03 PM
(<**1>(15555555555|14444444444)|xxxxxxxS4|1xxxxxxxxxx|xx.)
I recommend you replace the original with what I suggested because
1. xxxxxxxS4 adds and extra 4 seconds to the interdigit timeout when you dial 7-digit numbers.
2. xx. adds an extra 2 seconds to the interdigit timeout when you dial x11 or an 11-digit number.