OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: Seattleweather on January 12, 2012, 10:56:44 pm



Title: SIP URI and speed dial
Post by: Seattleweather on January 12, 2012, 10:56:44 pm
I was trying to setup a SIP URI dialplan, such as John@vbuzzer.com:80.  Is it any way to use speed dial number higher than 99, like 6612?  I seems to remember I can do it in SPA-100 like |<6612:>ohn@vbuzzer.com:80|}.  Thanks.


Title: Re: SIP URL and speed dial
Post by: RonR on January 12, 2012, 11:30:38 pm
It's SIP URI (not URL).

The OBi supports Speed Dials 1 - 99 only.

You could map a number of your choice to a SIP URI in a DigitMap rule:

<6612:**2ohn@vbuzzer.com:80>

In this case, SP2 would have to be configured for SIP.


Title: Re: SIP URL and speed dial
Post by: Seattleweather on January 12, 2012, 11:44:46 pm
Yes.  It worked!!!!!!!!  Thank you very much! (FIXED URI too)