I have 3 Obi110s on the same lan. I am replacing 2 Obi110s with a Obi202.
Since the 202 has only one obitalk number, how can I call direct to the separate phone ports from my other Obi, without dialing the service configured on the SP.
IE: from an obi app with no other service available.
If you employ Single-Stage Dialing Through Any OBi Trunk (http://www.obitalk.com/forum/index.php?topic=1103.0), the following should allow you to selectively call PHONE 1 or PHONE 2 of the OBi202 by dialing 'n*111' or 'n*222' from your OBi110:
OBi202
Voice Services -> OBiTALK Service -> InboundCallRoute : {(Mcot)>111:ph1},{(Mcot)>222:ph2},...