Trying to configure GV on SP1 and then use SP2 as SIP server so I can connect a sip phone to GV via Obi.
Having some trouble with this.
1. Where can a static IP be set in bridge mode? There does not seem to be an option. Do I have to set a dhcp reservation on my router via MAC address?
2. SP1 (GV) Service Status says "Resolving DNS"
3. SIP Phone cannot connect
Here is my config: http://www.filedropper.com/config_8
Quote from: 0815dela on November 10, 2012, 09:06:38 PM
Trying to configure GV on SP1 and then use SP2 as SIP server so I can connect a sip phone to GV via Obi.
1. Where can a static IP be set in bridge mode? There does not seem to be an option. Do I have to set a dhcp reservation on my router via MAC address?
2. SP1 (GV) Service Status says "Resolving DNS"
3. SIP Phone cannot connect
1. "dhcp reservation on my router via MAC address", should work.
2. In bridge mode I don't think you need a DNS entry in the OBi. Your router should provide for this.
3. From your PDF I see, {SP2@1001@
local_client} I think "local_client" should be ip of the sip client (phone).