|
Title: inbound calls Post by: claude on December 09, 2012, 07:55:40 am hi !
this is my inbound on sp1 {(obi500xxxxxx|sp31514xxxxxxx):ph},{ph1,ph2} i want to receive my calls on my obi500xxx which is ok but the sp3514xxxxxxx do not ring ! someone could help me pls ;) Title: Re: inbound calls Post by: hwittenb on December 09, 2012, 03:59:42 pm If I understand correctly, you want phone 1 and phone 2 to ring on an incoming call to sp1. You also want to ring another OBi, OBi500xxxxxx, and you also want to ring 514xxxxxxx. Is this correct?
If the above is correct I believe you should have for the inbound routing: {ph1,ph2,pp1(ob500123456),sp3(15141234567)} Title: Re: inbound calls Post by: claude on December 09, 2012, 04:50:30 pm thank you very much ! it is working..
what is the pp for? Title: Re: inbound calls Post by: hwittenb on December 09, 2012, 06:02:41 pm thank you very much ! it is working.. pp is for sending the call over OBiTalk to the named OBi adapter.what is the pp for? Title: Re: inbound calls Post by: claude on December 09, 2012, 06:21:40 pm ok thanks
|