OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: slobuds on April 05, 2011, 10:13:10 AM

Title: Bria Setup - Thunderbolt Android
Post by: slobuds on April 05, 2011, 10:13:10 AM
So I'd like to give this a shot - hoping for a better softphone than OBiOn, which is giving me sever/unusable echo.  The CounterPoint support folks tell me that Thunderbolt is not explicitly supported, however, there are several other HTCs which are and there is a good chance that it will work.  Money back if not.

To set up the Bria, I need the following settings:

User Name
Password
Domain
Outbound Proxy
Authorization Name (optional)

GlobalIP - private or public IP published at 'signaling' level.
Single Register - only needed if GlobalIP is 'on'

SIP Transport - UDP or TCP or TLS.

Audio Encription

SIP Regristration Refresh interval in seconds - from 30 to 900

Help with these settings would be appreciated.  Thanks.

Martin
Title: Re: Bria Setup - Thunderbolt Android
Post by: QBZappy on April 05, 2011, 11:50:48 AM
slobuds,

Everything you need to know how to setup is in this thread:
http://www.obitalk.com/forum/index.php?topic=40.0
Title: Re: Bria Setup - Thunderbolt Android
Post by: slobuds on April 05, 2011, 11:59:58 AM
Thanks!
Title: Re: Bria Setup - Thunderbolt Android
Post by: slobuds on April 05, 2011, 04:14:50 PM
Quote from: QBZappy on April 05, 2011, 11:50:48 AM
slobuds,

Everything you need to know how to setup is in this thread:
http://www.obitalk.com/forum/index.php?topic=40.0

Thanks again for the info Zappy, but the settings in these threads are greatly different from the settings for the Bria.  My installation is failing after several tries.

One thing I see with the Bria, without even succeeding with a log-in, is that Bria picks up my contacts off the Thunderbolt - big big plus.

Do you have any other ideas on how I can get the rest of the settings?

Thank you,
Martin
Title: Re: Bria Setup - Thunderbolt Android
Post by: RonR on April 05, 2011, 04:33:28 PM
I believe the thread QBZappy pointed you toward is for configuring a PC-based softphone like X-Lite to work with the Obihai middle-ware client that has the information you're looking for hard-coded into it.  That thread wasn't for a smartphone-based SIP client.

I don't believe the information you're looking for has ever been disclosed by Obihai.
Title: Re: Bria Setup - Thunderbolt Android
Post by: slobuds on April 05, 2011, 04:48:47 PM
Quote from: RonR on April 05, 2011, 04:33:28 PM
I believe the thread QBZappy pointed you toward is for configuring a PC-based softphone like X-Lite to work with the Obihai middle-ware client that has the information you're looking for hard-coded into it.  That thread wasn't for a smartphone-based SIP client.

I don't believe the information you're looking for has ever been disclosed by Obihai.


Ok - I kind of see that now.

I would sure like to get this working!  Either this Bria or the OBiON, but the features of the Bria look stronger.  Frankly.

But thank you anyway.
Title: Re: Bria Setup - Thunderbolt Android
Post by: jthacker48 on May 04, 2011, 08:44:46 PM
I've, also purchased the Bria soft phone for multiple platforms (iPad, Android, and desktop).  I want to get them working with my Obi.