OBiTALK Community

Firmware, Software Updates => Firmware / Advisories / Notifications for OBi Products => Topic started by: Agent88 on September 16, 2013, 03:30:53 PM

Title: WiFi FW Upgrades are OK!! Obi 202 users: Do NOT attempt to update f/w via wi-fi
Post by: Agent88 on September 16, 2013, 03:30:53 PM
It is OK to update the firmware of the OBi2 series and OBi3 series via WiFi.  That said, if your WiFi network is very slow and/or lossy, you may have greater success using Ethernet. 

Thank you - Obihai Support Team




If you have the USB wi-fi dongle, make sure you connect an ethernet cable before clicking on the auto update f/w feature of your Obi202 on ObiTalk.

If you don't connect via ethernet, it will fail and you will lose communication until you re-connect an ethernet cable.  Make sure it is connected to the "internet" port, not the LAN port.