What is Reboot Reason Code 9? I have got it twice since yesterday. The available codes in the admin guide are
Reboot Reason Codes:
0: Reboot on Power Cycle
1: Operating System Reboot
2: Reboot after Firmware Update
3: Reboot after New Profile Invoked
4: Reboot from Webpage
6: New Profile Invoked AND Profile URL Changed
8: Reboot from Telephone Port (IVR)
10: Reboot During OBiTALK Signup
11: Reboot During OBiTALK Signup
12: Reboot on Data Networking Link Re-establishment
code 9 seems to be missing.
Dvijen
Anyone know what code 9 is?
9: Reboot the unit from the OBi device's web page, e.g select the "Reboot" button.
Thanks
All the codes now appear to be included in the Admin guide:
Reboot Reason Codes
0: Reboot on Power Cycle
1: Operating System Reboot
2: Reboot after Firmware Update via provisioning or phone (***6)
3: Reboot after New Profile Invoked
4: Reboot after Parameter Value Change or Firmware has changed and invoked via device web page
5: Reboot after Factory Reset using the OBi device hardware pin
6: New Profile Invoked AND Profile URL Changed
7: Reboot from SIP Notify (Reserved)
8: Reboot from Telephone Port (IVR)
9: Reboot from Webpage - No change in parameter value(s) or firmware
10: Reboot During OBiTALK Signup
11: Reboot During OBiTALK Signup
12: Reboot after DHCP server offers IP, GW-IP and/or Netmask different from what the OBi device is currently using
13: Reboot on Data Networking Link Re-establishment
18: Reboot on WAN IP address change (OBi202/OBi302 only)
19: Reboot on LAN IP address change (OBi202/OBi302only)
My Obi202 rebooted about 3.75 hours ago - with a code 24? Any clue what reason #24 indicates?
Where do you see a reboot code?
Quote from: GPz1100 on April 24, 2018, 10:41:16 PM
Where do you see a reboot code?
The same line that shows the Uptime on the Status page.