|
Title: Obi202 with FXO to USB Line adapter has developed an issue Post by: kknb0800 on April 01, 2014, 06:38:36 am Hi,
For some reason, after almost a couple of months of working perfectly, the combination of the obi202 and FXO to USB adapter has developed an issue. Whenever I reboot the device, the phones beep as soon as the obi comes back on line with a message on the screen similar to a missed call notification. During the middle of last night, the phones started doing this every few minutes. They would beep and display this missed call message. After a couple of hours of this, I got up an noticed that the status light on the FXO to USB Line adapter had turned from solid green to solid red. I've since tried rebooting and resetting the device but to no avail. Does anyone know why this would happen? The obi202 functions as it should without the adapter which leads me to think that the fault is likely to be with the adapter. Are there any diagnostic tests I can run to confirm this? Thanks in advance Title: Re: Obi202 with FXO to USB Line adapter has developed an issue Post by: kknb0800 on April 03, 2014, 12:58:42 am managed to solve by doing a factory reset. Don't know why the obiline stopped working all of a sudden but whatever it was is now resolved thanks for obi support
Title: Re: Obi202 with FXO to USB Line adapter has developed an issue Post by: KAura on April 03, 2014, 07:29:44 am hmmm...
sounds more like someone was fishing to use your line for unauthorized outbound calls, but I'm glad you've got it fixed :) |