|
Title: Called party cannot hear outbound voice when make GV calls Post by: coldwater on May 03, 2014, 08:59:58 am My setup is SP1 only, obi100 registered to Sipsorcery to make GV calls. Sipsorcery register to CallCentric.
My cellular smartphone use Csipsimple to register to Sipsorcery as well, I can see two registration bindings with different ports from Sipsorcery web. I can make call and receive calls with smartphone (WIFI and wireless networks), everything is good. When I answer in-bounding calls from obi100, everything is good. When I make call from obi100 box to obitalk test, **9222222222, every is good. When I make call from obi100 box to PSTN number. call is connected normally, DTMF works well, I can hear in-bound voice, but other party cannot hear my voice. My router is old AT&T 2wire, tried to configure with firewall, no improvement. If I set Obitalk STUN enabled, incoming call rings, but when I push answer button, call is not connected and still rings. I am very confused. Thanks a lot for any suggestion and help. Title: Re: Called party cannot hear outbound voice when make GV calls Post by: coldwater on May 06, 2014, 11:38:48 am Switch ISP from att u-verse to time warner, the problem of one way voice gone, so it is att router's problem.
|