OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: Uncle_Wiggley on July 28, 2014, 06:58:24 am



Title: How to control number of rings until voicemail?
Post by: Uncle_Wiggley on July 28, 2014, 06:58:24 am
How do I configure my Obi 202 to go to voicemail after a certain number of rings?

I don't see that anywhere in the configuration options?


Title: Re: How to control number of rings until voicemail?
Post by: gderf on July 28, 2014, 08:04:10 am
I'm fairly certain this would be a function of your VoIP provider, if it can be set at all.


Title: Re: How to control number of rings until voicemail?
Post by: drgeoff on July 28, 2014, 11:43:07 am
I'm fairly certain this would be a function of your VoIP provider, if it can be set at all.
I'm 100% certain.  :)

Also in the case of SIP, there is no concept of number of rings, just the length of time.


Title: Re: How to control number of rings until voicemail?
Post by: Uncle_Wiggley on July 28, 2014, 04:46:46 pm
Thanks for the replies - found the setting.


Title: Re: How to control number of rings until voicemail?
Post by: Strellnikov on December 01, 2015, 03:09:19 am
WHERE IS IT????????????!!!!!


Title: Re: How to control number of rings until voicemail?
Post by: drgeoff on December 01, 2015, 05:52:40 am
WHERE IS IT????????????!!!!!

OBi devices have no voicemail. Voicemail and its controls are provided by the ITSP. (If GoogleVoice there is no control over time or rings before answer.)