OBiTALK Community

Region Specific Technical / Service Provider Support => Europe (Continent) & Africa (Continent) => Topic started by: nemecky on September 15, 2014, 02:08:40 am



Title: Configure in Germany?
Post by: nemecky on September 15, 2014, 02:08:40 am
I'm living in Germany and was wondering if the setup would be any different?

I have a google voice number, and I normally make/receive calls through gmail in a browser, and would love to have an actual handset. I'm only calling the US to talk to friends and family, so all of my calls are free.

If I have a handset from the US and the Obi device, it should work just the same as if I am in the states, right?

Thanks!
Andy


Title: Re: Configure in Germany?
Post by: MarkObihai on September 15, 2014, 02:57:20 am
Yes you can use your Google Voice account with an OBi for outbound calling from Germany to the US - just dial the numbers in US dialling format.  The setup would be the same.  You can use a standard German analog handset with the OBi (Note ISDN handsets aren't support) if you don't want to get one sent from the US.

- Mark.


Title: Re: Configure in Germany?
Post by: nemecky on September 16, 2014, 06:22:07 am
Hi MArk, thanks for the quick reply!

Ok, so I can just use a regular phone, that's great. When you say "analog", does that mean I can't use a digital cordless phone? Or are you referring to something else, like analog vs VOIP phone?

Which OBi device would work for a minimum viable setup?

Thanks again!


Title: Re: Configure in Germany?
Post by: MarkObihai on September 16, 2014, 06:38:13 am
Hi Andy, by analog, I mean a phone that you would normally just plug into a standard (non-ISDN) telephone wall jack - so a digital cordless phone would work, assuming it has just a normal jack to connect to a traditional phone service.

All OBi devices support Google Voice, the entry level product being the OBi100. If you want to add any USB accessories such as WiFi or Bluetooth then I recommend the OBi200 or OBi202.

- Mark.


Title: Re: Configure in Germany?
Post by: BluNitya on September 14, 2017, 07:01:50 pm
Hello,

I just got my new OBi202 to replace my PAP2T, which became defective. The SPA configuration Dial plan in my old Linksys PAP2T was:
(<**:>[2-9]|11[0-2]<:@gw0>|<:030>[1-9]xx.|<0:0>[0-9]xxxx.|<#,:>x.|<0#,:>x.<:@gw0>) to be compatible with Deutsche Telekom in Germany.
How does this translate to a DigitMap string?
Or can I just copy this string into the DigitMap setting?
Do you happen to have a configuration file for Germany?
Thank you very much for any help that you may provide.


Title: Re: Configure in Germany?
Post by: MarekT on October 10, 2017, 06:36:39 am
Any help?


Title: Re: Configure in Germany?
Post by: drgeoff on October 10, 2017, 09:50:36 am
No you cannot just copy that string into an OBi and expect it to work.  And OBis have more than one place  where such strings are entered.

You can help yourself by reading http://www.obihai.com/docs/OBi-DigitMapCallRoute-Tutorial-v1-1.pdf.  The reference bible is http://www.obihai.com/OBiDeviceAdminGuide#_Toc367543126 onwards.