|
Title: OBi110 Brasil Tones Post by: Tobias_Tromm on December 30, 2014, 10:11:40 am Hi.
Can someone help to convert these Grandstream Brasil tones to Obi110 standard? Thank You! Title: Re: OBi110 Brasil Tones Post by: azrobert on December 30, 2014, 11:12:31 am This is my first time modifying tone settings. Hopefully I got these correct. I don't see where the Disconnect tone is defined on the OBi110.
Tone Settings -> Tone Profile A Dial Tone 425-10;20 Ringback Tone 425-10;-1;(1+4) Busy Tone 425-10;10;(.25+.25) Reorder Tone 425-10;10;(.25+.25) Title: Re: OBi110 Brasil Tones Post by: Tobias_Tromm on December 30, 2014, 11:21:43 am Hi.
The Disconnect tone are located at Physical Interfaces -> LINE Port -> PSTN Disconnect Detection -> DisconnectTonePattern. Can you help me with these too? Thanks. Title: Re: OBi110 Brasil Tones Post by: azrobert on December 30, 2014, 11:26:27 am Disconnect Tone 425-10;10;(.25+.25)
Same as Reorder Title: Re: OBi110 Brasil Tones Post by: Tobias_Tromm on December 30, 2014, 11:27:32 am Thats true.
I will test and report back. Thanks! Title: Re: OBi110 Brasil Tones Post by: azrobert on December 30, 2014, 11:42:21 am This is what I did:
I changed the frequency to 425-10. The OBi110 has a combination of 2 frequencies. Your example has the 2nd frequency as zero. I assume this means it's no used, so I didn't include a 2nd. Your example doesn't include a tone duration, so I keep them at default. Dial at 20 seconds. Busy and Reorder at 10 seconds. -1 for Ringback means ring forever. I changed the cadence as specified in example. Title: Re: OBi110 Brasil Tones Post by: Tobias_Tromm on January 20, 2015, 03:44:58 pm Hi again.
I am experiencing some calls get disconnect when user is talking (using PSTN call to make the call). The call is terminated without reason. Can some tone be wrong or how can I debug? |