I am quite puzzled sometime when I changed the configuration through Obitalk Obi Expert Configuration the information does not get updated when I logged in directly to OBi through IP address.
I though I can use any of those two method to configure OBi200.
You have to decide which method you prefer to use. You can't use both as any change you do locally will be overwritten by ObiTalk.
To do configuration locally go to:
System Management > Auto Provisioning > Auto Firmware Update > Method: Disabled
System Management > Auto Provisioning > ITSP Provisioning > Method: Disabled
System Management > Auto Provisioning > ObiTalk Provisioning > Method: Disabled