My obi110 can't be factory reset
Serena:
I bought mine back in March and it has been working very well until a few of days ago. It started to reset itself every a couple of minutes. Followed by the tips on the forum, I updated the firmware. Updating was successful but it didn't help. Somebody mentioned that obi110 will reboot itself if it sees any network connection problem (http://www.obitalk.com/forum/index.php?topic=722.0). So I unplugged the ethernet cable and the phone line and tried to factory reset the obi110 device. After reset, it didn't reboot instead it flashes red all the time. Now I don't know what to do. Can anybody help me with this issue?
RonR:
With nothing but the power adapter connected to the OBi, you should be able to reset the OBi to factory defaults by holding the reset button on the bottom of the OBi depressed until the OBi reboots.
If that doesn't work, your best bet is to contact Obihai or Amazon for a warranty replacement.
Serena:
I tried to reset several times. It won't reboot. Do you know the number I can contact for replacement?
Thanks,
RonR:
Obihai : (408) 890-6000
Amazon : (800) 201-7575
jimates:
unplug power, hold the switch in with a paper clip, plug power back in while continuing to hold switch in until unit reboots (about 20 seconds).
Navigation
[0] Message Index
[#] Next page