Obitalk to SIP

(1/2) > >>

yiannisc:
Hi guys,

I have an OBi110. Want to bridge Obitalk to a SIP phone. From what I understand the Obi110 cannot do that.

So I thought to do this: Obitalk <-> SP1 <-> VoiP PBX <-> SIP Phone.

So, any call coming through the Obitalk to go to SP1 which is a PBX extension (xxx) which has a forward to another extension (YYY) to which the SIP phone is connected to. Obviously I want the same to happen in the opposite direction.

Many thanks,
Yiannis

azrobert:
Which provider do you have defined on SP1?
Is SP2 defined and which provider?
Is your PBX Freepbx/Asterisk?
Is the PBX on the same LAN as the OBi110?
Is the SIP phone on the same LAN as the OBi110?
What model is your SIP phone?
Can your SIP phone call without registration?
If your SIP phone can call without registration, you won't need the PBX.

yiannisc:
Hi thanks for the help.

SP1 has no provider the PBX is pbxes.org (cloud PBX).
SP2 not connected.
The SIP phone is on the same LAN as the OBi110.
The SIP Phone is a Gigaset N300A IP (Cordless SIP phone).
I don't think that the N300A can call without registering.

I don't want to be using the phone port or line port of the OBi110. That's why I want to route OBitalk to SIP, somehow.

The SP1 is registering OK on pbxes.org and I have the forwarding working OK. I only need to do the routing in the OBi110 of OBitalk <-> SP1.

Thanks again,
Yiannis

azrobert:
Do you want to route the call over the OBiTalk network to another OBi ATA?

The following would have to be modified.
http://www.obitalk.com/forum/index.php?topic=5411.0

yiannisc:
Hi,

No, not to another OBi ATA.

Thanks,
Yiannis

Navigation

[0] Message Index

[#] Next page