Endless loop setting up the OBi100

<< < (4/6) > >>

Lavamama:
I am receiving the same message as BeeBee (..annual support period has ended...), and I'm afraid I'm having trouble figuring out how to solve the problem by following this thread.  I'd be grateful if someone could spell out the steps to the fix in one message to this technologically challenged person! 

All was working well until yesterday - but I did change my google password, so I'm wondering if that caused the trouble?

Lavamama:
Never mind!  I figured it out.  I used the instructions here http://www.obitalk.com/forum/index.php?topic=9.0 to update the firmware.  All seems to be working now.  I hope!

nsb7:
Quote from: Taoman on June 06, 2015, 07:25:30 pm

Quote from: BeeBee on June 06, 2015, 06:53:12 pm

Is there a repository where I might legitimately download a later firmware (if any)?  I called a friend back home with an OBi 110 with Build 2872, and he can "configurate" just fine.  (And I assume the 110 firmware couldn't be used on the 100.)


Yes, the "110 firmware" works for the 1xx series including the OBi100. You can download it from here:
http://fw.obihai.com/OBi110-1-3-0-2872.fw

After downloading the 2872 firmware, go to System Management>System Update in your OBi web interface. Under Firmware Update browse to the file and install the update. After your OBi reboots you should be able to configure Google Voice on the Obitalk web portal.
I manually updated my OBi110 to 2872 without issue but keep in mind there is always a small chance that when updating your firmware something could go wrong and "brick" your OBi.



This instructions worked for me. Thanks.

fuguansun@gmail.com:
I had exact same issue.

I have two questions here:

for those settions under system management or voice management, I could not modify anything. Seems it just gray out.

another question is, how do I update the firmware? where is the tab?

Thanks in advance.

andq22:
Agree with nsb7.
Thank you Taoman!!

fuguansun:
1: update the firmware from the local web interface.
2: once the firmware is updated you'll be able to use the google voice wizard from Obi web dashboard http://www.obitalk.com/obinet/pg/obhdev

local web portal:
192.168.1.something,
admin
admin

System Management, Device Update, Select file to update firmware.

guide: http://blog.voipdiy.com/2013/06/obihai-obi100-how-to-update-firmware.html

Navigation

[0] Message Index

[#] Next page

[*] Previous page