Endless loop setting up the OBi100
ardiuno:
Bumping this thread up again.
I have ended in the same endless loop tonight with OBi100 device. Upgraded the firmware to 1.3.0 (Build: 2872). Still the same problem. Removed the Google Voice service from SP1. Could not return it back. Using web interface tried to change "System Management -> Auto Provisioning -> OBitalk Provisioning" but "ITSP Provisioning" is set to System Start and greyed out. At this point hardly anything can be changed thru web interface. ITSP Profile A -> General is showing SignalingProtocol to be SIP and is grayed out. Cannot change it to GV, and obviously cannot enter GV username/pass as it is grayed out.
Basically it seems like a complete bust. Any help is appreciated.
LTN1:
Quote from: ardiuno on May 18, 2016, 09:34:17 pm
Bumping this thread up again.
I have ended in the same endless loop tonight with OBi100 device. Upgraded the firmware to 1.3.0 (Build: 2872). Still the same problem. Removed the Google Voice service from SP1. Could not return it back. Using web interface tried to change "System Management -> Auto Provisioning -> OBitalk Provisioning" but "ITSP Provisioning" is set to System Start and greyed out. At this point hardly anything can be changed thru web interface. ITSP Profile A -> General is showing SignalingProtocol to be SIP and is grayed out. Cannot change it to GV, and obviously cannot enter GV username/pass as it is grayed out.
Basically it seems like a complete bust. Any help is appreciated.
Try updating with this newer build: http://fw.obihai.com/OBi110-1-3-0-2886.fw
ardiuno:
Thanks, good that we have a link to the latest firmware here for posterity. I would point out that the link http://fw.obihai.com/OBi-latest.fw that is mentioned at http://www.obitalk.com/forum/index.php?topic=9.0 resolves into 1-3-0-2872, not 1-3-0-2886
After upgrading the firmware, things were really smooth until I wanted to configure GV service. I got stuck on "Configuring ...". Followed the suggestions from here https://www.obitalk.com/forum/index.php?topic=9423.0 and after hard reset finally got it to work.
Amazingly painful process. Thanks LTN1 for the assistance.
yorktown:
Works here as well. I posted a summary with the firmware link and info on how to upgrade the firmware for noobs: http://www.obitalk.com/forum/index.php?topic=11256.msg73954#msg73954[/b]]http://www.obitalk.com/forum/index.php?topic=11256.msg73954#msg73954
Brisk:
To update firmware, simply pick up your phone and dial ***6, 1.
Navigation
[0] Message Index
[#] Next page
[*] Previous page