Endless loop setting up the OBi100
azrobert:
You are already at 2824, so you don't have to do anything with firmware.
Edit:
When you try to configure GV on OBiTalk, they want to upgrade your OBi100 to the newest firmware. That is why the message for the fee.
BeeBee:
D-oh! Yes, of course, duh. I guess since I'm being obtuse I should be absolutely clear on what you mean by "configure locally." Does that mean doing it through the "192.168.etc.etc" web browser interface?
EDIT: Ignore this last question. I fumbled my way there. Now to see if it works.
BeeBee:
Nope. Still getting getting the runaround and a status of "Backing Off (874s):Authentication error." Is there anything I can try next?
aliron:
I am having this issue as well. I changed my google voice password and I couldn't update it on obitalk.com. I tried deleting the settings so I could start over but no dice--I can't go to "google voice setup" as it just redirects me to the same page instead of actual settings.
azrobert:
Sorry, I forgot something.
Make this change:
System Management -> Auto Provisioning -> OBitalk Provisioning
Method: Disabled
While you're at it change the Method on Firmware Update and ITSP Provisioning to Disabled.
Now re-enter the info from my previous post.
When OBiTalk Provisioning is enabled, OBiTalk might overlay any changes you made locally.
In the future you must make all changes locally.
Don't forget to re-boot.
If you still get the Backing-Off, make sure your GV ID and password are correct.
Navigation
[0] Message Index
[#] Next page
[*] Previous page