Any barring rule works only once on OBI200
GreggNet:
I had a similar problem for my mother. But I only needed to block her from dialing one phone number. It's the only phone number she remembers now. She has a memory problem and would repeatedly call her sister at all hours and in the middle of the night.
I updated Profile A General DigitMap by adding the following right before the ending parenthesis. I'll use all 5's here instead of the actual phone number.
|!15555555555|5555555555
By using these 2 rules the number is blocked with a fast busy signal when dialed with the 1 in front of it (the way my mother always dials it,) but it goes through when dialed without the 1 in front (so that I can call the number from this line.) Without the second rule of just the number you'll get a "no call route" message when dialing without the 1.
Anyway. This was all trial and error on my part. Maybe this can help someone else who is just looking to block one or a few specific numbers from being dialed.
Oh, and I forgot to add that you have to add the new rules to the rest that are there inside the parenthesis separated by the | symbol. I originally tried adding the new rules in their own parenthesis but that gave me the problem the above poster was having of it only blocking for the first dial and then after that subsequent dials would go through.
Navigation
[0] Message Index
[*] Previous page