Required $10/year upgrade to update Google Voice Config?
EllenL:
I had the same notice this morning. After reading through all threads, it is clear that the problem is firmware on the OBI100. Mine was 1.3.0.2872, which is listed as the latest, but it is not.
I manually installed the OBI110 update 1.3.0.2886 by logging in to my device's IP and travelling to the System Management page. After reboot my GV was working properly
Nice attempt at a cash grab they promised us would never be required, though.
Thank you to everyone that weighed in on this issue.
mixofia:
You just have to pay. I have an Obi110 set up for my Mom, so it's not worth it to not pay on principle.
But before I did so, I manually upgraded to SoftwareVersion 1.3.0 (Build: 2872) manually, which was the latest FW on the website at http://fw.obihai.com/OBi-latest.fw. It still wouldn't let me configure GoogleVoice.
Then I paid and it upgraded to a new, secret FW, 1.3.0 (Build: 2886)
After that, it took a couple minutes and GVoice was back in action.
Mango:
Paying the $10 fee is not required. You can update manually: http://www.obitalk.com/forum/index.php?topic=11256.msg73954#msg73954
beaky1211:
I just downloaded the firmware and updated it
http://fw.obihai.com/OBi110-1-3-0-2886.fw
It works for obi100 (which i what i have)
mo832:
OK, here is a tricky issue that I have.
1 of 2 devices is located at my parent's house. The remote device is currently the only one that is having a problem connecting. I would like to do the manual firmware upgrade, but if I type the IP address on the REMOTE phone into my LOCAL browser, will it reach the remote device? Or must you be physically connected to the obi device in order to access it via the address?
I cannot travel to the remote location, and my father is not capable of performing these tasks himself. At least not reliably or a high risk of really messing up something.
Navigation
[0] Message Index
[#] Next page
[*] Previous page