PhonePower SIP / Asterisk
mikewis:
@azrobert
Thanks.. yes this means I dont need PP anymore. I just tried what you said, Superfecta and works just like you said. Great.. I too have RASPBX and it works great. Have you created any cool scripts for Telemarketers? This is why I setup Asterisk and to only ring the phones at certain times etc.
If I use the Obi for my ATA to my analog cordless phones and there is no Hold button, how would I put a caller on Hold? can I use a flash on the phone?
Thanks
Mike
Taoman:
Quote from: mikewis on June 10, 2015, 07:32:39 pm
Well it shows Registered in PhonePower.. My freepbx shows Registered. When I dial out on the trunk it says all circuits busy.
Glad you got things working. Still curious about your plan, however. Do you have an "OBi" PhonePower plan or a regular PhonePower subscription?
Quote
Q: Can I use any device on this plan?
OBihai plans are only eligible with Obihai devices.
http://www.phonepower.com/Obihai_info.aspx
mikewis:
I have the Obihai Phone Power plan but there is an advance option to allow for SIP connection. I have enabled that and get the SIP credentials.
But never could get it use the Phone Power Trunk.. but I had Phone Power for Callerid but now that @azrobert told me about Superfecta, I can get calleid name on GV. So I am going to use GV instead of PP now.
-Mike
azrobert:
I use NoMoRobo on my OBi to block telemarketers. I also have a black list on my OBi and route these calls to Zapateller on Raspbx. Zapateller is an inbound route on Raspbx that routes calls to Terminate Call/SIT Tone. Some people claim that NoMoRobo will block some legitimate calls. I have not had this problem.
I think you can setup NoMoRobo on Raspbx using a Ring Group. Raspbx also has a Black List application you can install using Module Admin. GV has a spam filtering, but I never used it.
Flash will put the call on hold, but you will hear a dial tone. The dial tone will last for 20 seconds and then you will get some nasty tones. I don't know what happens next if you continue to keep the call on hold. You can modify the dial tone to extend the time. I don't know if there is a max time period.
If someone knows how to actually put a call on hold, please chime in.
Navigation
[0] Message Index
[*] Previous page