$10 random to keep using MY device? Really?
zorlac:
Quote from: thedog on May 21, 2016, 09:49:36 am
I had the same problem..paid the $10, downloaded the latest f/w and still no luck.
f/w upgrade says successful but I get the red/green flashing lights. The admin page takes me straight to the f/w upgrade page..tried 2772 and 2886..factory resets but no luck.
I guess I'll have to buy a new device.
I'm so upset by these guys that I have half a mind to ditch obihai entirely and look for an alternative even if it costs more.
Could your power adapter possibly be faulty?
thedog:
I tried a couple of different power packs...no difference.
thedog:
Just after my last post I tried the following and it started working -
Unplugged power for a few minutes..updated with 2772 then 2886 and bingo it started working..go figure.
I'm going to get a spare unit just in case.
thedog:
obi refunded my $10. The ob100 continues to give problems. Every time I power cycle it, it goes into red/green blink mode and I have to do a f/w upgrade. It continues to work till I power cycle it again.
So anyway I got a new obi200 from Amazon and that seems to be ok.
SteveInWA:
Quote from: thedog on May 23, 2016, 03:33:27 pm
obi refunded my $10. The ob100 continues to give problems. Every time I power cycle it, it goes into red/green blink mode and I have to do a f/w upgrade. It continues to work till I power cycle it again.
So anyway I got a new obi200 from Amazon and that seems to be ok.
Some older OBi 100s end up with this fate. It's possible that their flash memory simply fails. Getting a 200 was a good move. Enjoy.
Navigation
[0] Message Index
[#] Next page
[*] Previous page