$10 random to keep using MY device? Really?
livefreely:
you can update for free, but you have to Download this firmware for the Obi110 http://fw.obihai.com/OBi110-1-3-0-2886.fw
(Yes, I know its for the Obi110 but it will work in the Obi100).
as stated elswhere by yorktown:
Then Reboot.
If you don't know how to install the firmware:
Dial * * * 1
It will give you the IP Address: 192.168.XXX.XXX (example 192.168.1.27 )
In your browser, enter the IP Address as the URL.
User Name: admin
password: admin
On the left side, navigate to SYSTEM MANAGEMENT
Click DEVICE UPDATE
At the top where it says "Firmware Update
Select file to update firmware [BROWSE] ...."
Click BROWSE and add the file. Then click UPLOAD
Once it reboots its done.
i went around and around for 3 days until i ran across this info. it worked for me on an Obi100 that i've had for years. thank you yorktown!!!
bsdaiwa:
Strange, my 100 and 110 OBi's had the message that disabled GV but late yesterday they started working again without having to resort to using the older firmware. Thank God, several of mine are on different continents and I would have to have them mailed back to me to install the older firmware.
dircom:
I gave a 100 to a friend in Belize a year or so ago.
They wouldn't know how to log in to the obi and make changes.
SP1 is gone (GV)
SP2 is IPCOMMS and still works fine
Would anything that OBi did recently Delete SP1 completely?
SteveInWA:
Quote from: dircom on June 16, 2016, 03:41:27 pm
I gave a 100 to a friend in Belize a year or so ago.
They wouldn't know how to log in to the obi and make changes.
SP1 is gone (GV)
SP2 is IPCOMMS and still works fine
Would anything that OBi did recently Delete SP1 completely?
Nope. Impossible.
MikeinFL:
Quote from: SteveInWA on May 26, 2016, 08:32:52 pm
Read and follow the directions: http://www.obitalk.com/forum/index.php?topic=8560.msg56460#msg56460
Thanks Steve! Just did update with 2886 on my 100, now working again. However I did not "delete your OBi device off of your account." or factory reset, or "OAUTH 2.0 to authenticate to your GV account" in your instructions. I simply did the firmware update and GV started working again right after. am I ok?
Navigation
[0] Message Index
[#] Next page
[*] Previous page