OBI202 versus Cisco SPA112 or SPA122

(1/2) > >>

JDDD:
Hi,
I have a CISCO spa112. The basic function I would like to use is the DIALPLAN to connect to several VoipProviders. Whichever have the best/cheapest connection fees. So basically on the phone numers used I would like to connect to VoipProv1 or Prov2 or 3.

Cisco spa112 is not working for this solution.

Is this possible with the Obi202.  Does anybody use this feature ??  If yes, please give also your remarks (positive or negative).

WelshPaul:
This can be done on the OBIHAI hardware. :)

You could have all 01/02/03 numbers go out over SP1 (Sipgate) yet have all 07 mobile numbers go out over SP2 (Voipfone) etc.

JDDD:
yes, I read the manual.  But this was mentioned in the manual of the Cisco spa112 as well. But in the end, it did not work.

Did you used it, with at least more then 1 provider ??

WelshPaul:
I just added {(07xx.):SP2} to my OutboundCallRoute and made a test call - worked just fine.

The above rule forces all UK mobile phone numbers out over SP2, in my case Sipgate.

drgeoff:
Yes this functionality works fine with Obi devices.  A 202 can selectively send calls to one of at least 4 ITSPs.  Even more are possible if some permit calling without registration.

The selectivity can be very fine grained even to the extent of picking out individual phone numbers.

Navigation

[0] Message Index

[#] Next page