OBi2182
OBi1022
Poly D230
OBi200
OBi202
OBi212
OBiWiFi5G
January 04, 2022, 10:53:14 am
Welcome,
Guest
. Please
login
or
register
.
News
:
Forum Home
Search
Login
Register
OBiTALK
OBiTALK Community
>
General Support
>
Installation and Set-Up (Devices)
>
Unable to connect
Pages: [
1
]
« previous
next »
Print
Author
Topic: Unable to connect (Read 2213 times)
dkjfhsdjhfkjdshfkjsd
Newbie
Posts: 3
Unable to connect
«
on:
June 21, 2015, 05:35:14 am »
My OBi202 is connected to a TP-Link
router(Model No. TL-WDR3600). The Ethernet port light
on the router does not come on when I connect the
router and the OBi202. This comes on when I connect
my laptop to the router. Don't know if that matters,
just thought I'd mention something I noticed. OBi202
is not listed in the DHCP client table of the router.
So I cannot determine the IP address of the device to
open ports or connect to the device from my laptop.
The light on the device is alternating between
red/green and off. Dialing the numbers as suggested
by your website does not do anything.
Logged
drgeoff
Hero Member & Beta Tester
Posts: 5539
Re: Unable to connect
«
Reply #1 on:
June 21, 2015, 08:23:35 am »
http://www.obihai.com/faq/Troubleshooting-sec/power-light-meanings
Logged
dkjfhsdjhfkjdshfkjsd
Newbie
Posts: 3
Re: Unable to connect
«
Reply #2 on:
June 22, 2015, 08:49:30 am »
Thank you for the link. The page suggests that I update the OBi's firmware by connecting to the OBi's IP address. My problem is I can't get the IP address of the OBi. The device is not listed in my router's DHCP table.
Logged
dkjfhsdjhfkjdshfkjsd
Newbie
Posts: 3
Re: Unable to connect
«
Reply #3 on:
June 22, 2015, 09:02:51 am »
I just saw on another post that if the phone connected to the OBi does not have a dial tone then the unit may be defective. Can someone please confirm that? I do not get a dial tone.
Logged
dircom
Sr. Member
Posts: 491
Re: Unable to connect
«
Reply #4 on:
June 22, 2015, 02:20:33 pm »
verify that your phone is plugged into Phone 1, or Phone 2, on the back of your 202
if you have another power supply, that is same volts / amps & polarity, try another power supply
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Firmware, Software Updates
-----------------------------
=> Firmware / Advisories / Notifications for OBi Products
-----------------------------
General Support
-----------------------------
=> On-Topic: Obihai and OBi Products
=> Installation and Set-Up (Devices)
=> Day-to-Day Use
=> New to Using the OBi / VoIP
=> OBiTALK Web Portal
=> Feature Requests
-----------------------------
Region Specific Technical / Service Provider Support
-----------------------------
=> North America - Including Google Voice, Skype, etc.
=> Australia, New Zealand and the Pacific Islands
=> Asia (Continent)
=> Europe (Continent) & Africa (Continent)
Loading...