Inbound call route => Simultaneous calls
shap:
BTW, I have similar problem when specifying the following Inbound route:
{ph,sp1(77777777@sipme.me:5060)}
What is happening, is that Obi try to call sipme.me using SP1 and immediately
say it is connected (i can see it in call status) - regardless if the caller picked up the phone.
Riyas:
Hi
I just tested your solution (Physical Interface -> LINE port -> DetectOutboundConnectMethod)... I have both lines ringing at the same time. Thank you very much.
If I answer my obi phone line, my mobile stops immediately and I can talk without any problem.
But If I answer my mobile, my obi phone continues to ring and I can't hear anything (it takes around 10 seconds to hear the other party)
@Jimates : I am in France, we don't have google voice here.
RonR:
Quote from: shap on June 12, 2011, 01:20:10 am
BTW, I have similar problem when specifying the following Inbound route:
{ph,sp1(77777777@sipme.me:5060)}
What is happening, is that Obi try to call sipme.me using SP1 and immediately
say it is connected (i can see it in call status) - regardless if the caller picked up the phone.
Do you have SP1 configured as SIP? If so, can you put SP1(77777777@sipme.me:5060) in a speed dial and successfully reach it using that speed dial? Or successfully call it by dialing **177777777*82*80*200*62*5060#?
FWIW, the following SP1 (Google Voice) InboundCallRoute : {ph,vg5(pap2),sp2(xxxxxxxx@sipsorcery.com)}
simultaneously rings the OBi PHONE Port, a phone connected to a PAP2 accessed via VG5, and a phone connected to my Sip Sorcery account when someone calls my Google Voice number. My SP2 is configured as SIP.
jimates:
Quote from: Riyas on June 12, 2011, 07:32:08 am
Hi
I just tested your solution (Physical Interface -> LINE port -> DetectOutboundConnectMethod)... I have both lines ringing at the same time. Thank you very much.
If I answer my obi phone line, my mobile stops immediately and I can talk without any problem.
But If I answer my mobile, my obi phone continues to ring and I can't hear anything (it takes around 10 seconds to hear the other party)
@Jimates : I am in France, we don't have google voice here.
By you not mentioning google voice, and also by saying your landline is the only free calling to your mobile, I kind of figured you were not in the US.
shap:
Yes, SP1 is configured as SIP, SP2 as GV.
The issue is that 77777777@sipme.me:5060 is ringing ok and if answered - will work ok, however
the phone port ringing only once or not at all.
When I remove SP1(77777777@sipme.me:5060) from inbound rule, phone will ring ok.
Other interesting thing is that caller think that call is connected almost immediately and start charging for it.
To check this, you can call your GV account using skype, and you should see that skype start charging before you actually answer the call.
I did not answer the call here.
Navigation
[0] Message Index
[#] Next page
[*] Previous page