OBi2182

OBi1022

Poly D230

OBi200

OBi202

OBi212

OBiWiFi5G
January 04, 2022, 08:08:22 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
« previous next »
  Print  
Author Topic: Different Dialtone for Line Port  (Read 2175 times)
N7AS
Hero Member
*****
Posts: 519
« on: August 02, 2011, 05:43:24 pm »
I would like to hear a different Dialtone when I select the Line Port when I press #. How would I do this? What dialtone cadence would sound best and where should it go?
I want to leave the Dialtone on SP1 and SP2 as default.
Logged
Grant N7AS
Prescott Valley, AZ
https://www.n7as.com

A journeyman electrician sent his apprentice with a 5-gallon bucket and was told to put the ends of the service drop in the bucket and fill it with volts. He was there all day.
RonR
Hero Member
*****
Posts: 4527
« Reply #1 on: August 02, 2011, 05:46:54 pm »
When you dial #, you immediately get bridged to the LINE Port and hear your telephone company's dialtone.
Logged
N7AS
Hero Member
*****
Posts: 519
« Reply #2 on: August 02, 2011, 06:00:14 pm »
The Line Port is connected to Line 2 of my PAP2T. So I guess I would have to modify the Dialtone on it. I just got to figure out what values to change it to. Any good ideas, as I remember you also use a PAP2T?
Logged
Grant N7AS
Prescott Valley, AZ
https://www.n7as.com

A journeyman electrician sent his apprentice with a 5-gallon bucket and was told to put the ends of the service drop in the bucket and fill it with volts. He was there all day.
RonR
Hero Member
*****
Posts: 4527
« Reply #3 on: August 02, 2011, 06:09:04 pm »
That's correct, it's the PAP2's dialtone you'll hear when you dial # on the OBi phone.

I've never had a need to change any of the tones on a PAP2, but it's all documented in the Administrator's Guide.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC

Advertisement
Advertisement