Obi100 and PBXes.org

(1/2) > >>

jclark5093:
Is it possible to link my PBXes account to my Obi device? I already have it set up with my trunks that I use on my smartphone, and it would be nice to have everything consolidated.

I posted something a bit more vague in another forum, but this is what and where I should have posted.

I know nothing of Asterisk, though I'm technically adept I just don't have that knowledge. I do have my PBXes set up properly and use it with CSipSimple on Android. I would like to use it on my Obi100 as well.

Thanks  ;)

Riyas:
Hi,

I can confirm you that pbxes.org is working with Obi. I have one pbxes account (free one) set in SP1 with 2 inbound and 2 outbound routes. I am using dial plan (in pbxes) to select the correct route. If you need any help to configure it, feel free to ask me. I'll try my best.

codex22:
Though I'm not the original poster, I'd like to see the correct settings for registering a OBI-110 to pbxes.org.

I just tried and only get "Register Failed: No Response From Server ".

Thanks

Michael

RonR:
In most cases, the only settings required (from Defaults) to register the OBi as a SIP client to a SIP server are:


Service Providers -> ITSP Profile x -> SIP -> ProxyServer

Voice Services -> SPx Service -> AuthUserName

Voice Services -> SPx Service -> AuthPassword

Voice Services -> SPx Service -> X_ServProvProfile : (must match ITSP Profile)

codex22:
Hi Ron,

I haven't had a problem configuring another SIP service. Just can't get it to work with PBXes.

There has been a thread in January (http://www.obitalk.com/forum/index.php?topic=46.msg77#msg77) in which somebody had the exact same problem.

OBISupport answered with:
"Our next firmware release will have the fix for this."

There have been releases since, but maybe that fix (whatever it is exactly) never made it in?

Michael

Navigation

[0] Message Index

[#] Next page